Lan Ipv6; Connected Devices - Nokia FastMile 3.2 User Manual

User Guide
Note: Check the DHCP range before you change the LAN IP. If you want to use the LAN
IP, which is included in the previous DHCP range, change the DHCP range first. Click Save.
Then, change the LAN IP.
Configure a static route and bind a MAC address to a specific local LAN/IP address
by entering the MAC and IP address in the static DHCP text boxes.
Click Add.
Your values appear in the table below.
Repeat for all MAC addresses to be bound.
The configured MAC and IPv4 address appear in the table below. Click Delete to
remove any of the MAC address configurations.

LAN IPv6

Click LAN IPv6.
The Network/LAN settings/LAN IPv6 screen appears.
Figure 42
Click the switch button to enable or disable the IPv6 DHCP LAN.

Connected devices

From the network menu, select Connected Devices.
The Network/Connected Devices screen appears.
3TG-02292-AAAA-TCZZA-02
Network: LAN Settings: LAN IPv6
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
WebUI hierarchy screens
59