Status Led - Nokia FastMile 3.2 User Manual

Troubleshooting
Note: LED indications can change over time due to variable 4G/LTE and or 5G signal
conditions.
If the thresholds have been changed during pre-configuration, the LED indications will be
different.

Status LED

The Status LED indicates the status of the FastMile 5G Gateway 3.2 device.
Status LED
Table 1
LED color LED behavior
White Slow blinking
White Fast blinking
Yellow Blinking
Red Slow blinking
Red Fast blinking
Red Solid
Green Solid
Green Blinking
80
What it means
WPS pairing in progress
or reset button pressed longer
than 5 - 30 seconds which will
trigger factory reset
WPS pairing successful
or reset button pressed longer
than 5 - 30 seconds which will
trigger factory reset
Start up
Missing SIM card, or SIM card is
PIN-locked, or SIM card is broken
and could not be recognized by
the CPE
Reset to factory default settings
No 4G/LTE or 5G connection Or
Some applications in abnormal
state.
Signal test in progress.
4G/LTE, or 5G, or Ethernet WAN
connection 1
Software upgrade is ongoing
Ethernet WAN is down and the
device is switching back to
wireless WAN
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
What you may consider doing
Do nothing
Do nothing
Do nothing
Check SIM
Replace SIM (it is recommended
to replace a SIM card with a new
PIN-locked SIM card)
Factory reset in progress
Consider moving the gateway
Power Off/On
Do nothing
Caution: do not turn off the device
Do nothing.
3TG-02292-AAAA-TCZZA-02
User Guide