Odometer Mode - Navman S300 User Manual

S300 - Normal operation
5.1.3 Speed (Maximum) mode
This mode lets you monitor session distance and maximum
speed.
session distance
Access this mode
If necessary, press
operation. Press
shown above.
While in Speed (Maximum) mode
• Press and hold
• Press to go to the next mode.

5.1.4 Odometer mode

This mode shows total distance since odometer was last reset.
total distance
Access this mode
If necessary, press
operation. Press
shown above.
While in Odometer mode
• Press and hold
• Press to go to the next mode.
Note: The S300 displays distance in units corresponding to speed
units (see section 4.1.4).
1-18
km km/h
MAX
to turn the power on and start normal
repeatedly until the screen appears as
to clear maximum speed only.
km
2
8 7
3
to turn the power on and start normal
repeatedly until the screen appears as
to clear odometer only.
S300
NAVMAN
maximum speed