Navman S series User Manual

Navman S series User Manual

S-series
Hide thumbs Also See for S series:
Table of Contents

Advertisement

S-Series

User Manual

English
en

Advertisement

Table of Contents
loading

Summary of Contents for Navman S series

  • Page 1: User Manual

    S-Series User Manual English...
  • Page 2: Important Safety Information

    On main roads, the distance to an exit calculated by the Navman may be further than the distance shown on road signs. Road signs show the distance to the start of an exit while the Navman shows the distance to the next intersection, i.e., the end of the exit ramp or road.
  • Page 3: Warning Notice To Drivers In The United States

    Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage. Navman disclaims all liability for installation or use of the Navman that causes or contributes to death, injury or property damage or that violates any...
  • Page 4: Table Of Contents

    S30 3D ............................8 S50 3D/S70 3D..........................9 How do I get started?...........................10 How do I turn my Navman on for the first time? ................10 How do I adjust the volume?......................14 How do I monitor the battery status?....................14 What are the main screens I will use?....................15 Main Menu screen ..........................15...
  • Page 5 How do I save a NavPix to a POI? ....................57 What is Navman Connect (Local Search)? ..................58 How can I pair my Navman with a Bluetooth mobile phone?............58 How do I search for a POI using Navman Connect? ...............59 How do I make a hands-free call?......................61 How can I pair my Navman with a Bluetooth mobile phone?............61...
  • Page 6 NavDesk Preferences.......................101 Navman Connect ..........................102 How do I search for a POI using Navman Connect?..............102 How do I install POIs from my computer to my Navman? ............103 How do I delete a POI from my Navman?.................103 My Maps ............................104 How do I install maps onto my Navman?..................105 How do I install maps from DVD? .....................105...
  • Page 7: Welcome

    S-Series Welcome Thank you for purchasing this Navman. This manual has been prepared to guide you through the operation of your Navman from first set-up through to continuous use. Please read this manual carefully before using your Navman for the first time. Keep this manual in a safe place and use as your first point of reference.
  • Page 8: Getting To Know Your Navman

    S-Series Getting to know your Navman We recommend that you familiarize yourself with the Navman's basic operations. Components S30 3D Power switch Cradle socket Socket for in-car charger, USB cable, home charger and TMC Slot for memory card accessory kit (sold separately)
  • Page 9: S50 3D/S70 3D

    S-Series S50 3D/S70 3D Slot for memory card Cradle socket Socket for in-car charger, USB cable, home charger and TMC cradle Power switch (sold separately) Battery indicator Speaker Microphone...
  • Page 10: How Do I Get Started

    How do I get started? Note: The first time you use your Navman, it may take up several minutes to establish a GPS connection. For more information about GPS, refer to the GPS Frequently Asked Questions guide on the enclosed DVD.
  • Page 11 S-Series S50 3D/S70 3D...
  • Page 12 To prevent the Select Language screen from displaying on each start-up, clear the Show on start-up check box. You can change your preferred language while using your Navman (see "Language" on page 85). Read the warning message The Safety Agreement screen will display after you have selected your preferred language.
  • Page 13 To move forward through the Tutorial screens, tap To view the previous screen, tap To view the Tutorial again while using your Navman, see "Tutorial" on page 96. Note: If you have maps installed from multiple continents, you may be prompted to select the maps you require.
  • Page 14: How Do I Adjust The Volume

    To charge your Navman using your computer, plug the large end of the USB cable directly into a USB port on your computer (not a USB hub) and plug the small end into on the bottom of your Navman.
  • Page 15: What Are The Main Screens I Will Use

    Note: The Main Menu screens may differ from those displayed above, depending on your Navman model. Map screens There are five map screens used to view the route to your destination:...
  • Page 16: How Do I Navigate With Gps

    Your Navman receives GPS signals via the internal GPS antenna. To guarantee the optimum GPS signal strength, ensure your Navman is outdoors, or in a vehicle outdoors, and has an unobstructed view of the sky. GPS reception is not usually affected by weather, however, very heavy rain or snow may have a negative effect on your reception.
  • Page 17: How Do I Go From A To B

    S-Series How do I go from A to B? Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. When you ...
  • Page 18: How Do I Search For An Address

    This case study will show you how to enter an address and how to navigate to it. The address we will be using in this example is: Note: The below address is fictitious and used as an example only. 1 Navman Street Horley Surrey...
  • Page 19 S-Series 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. From the Destination Search screen, tap The Select a map screen will display.
  • Page 20: Using The Keyboard Screen

    S-Series Using the Keyboard screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. Search results will be listed in matching order, with the closest matches appearing at the top of the list. A maximum of 99 results will display.
  • Page 21 S-Series Use the Keyboard screen to enter Navman street as the street name of your destination, then tap the search result. Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring areas, and common street names will produce search results ordered by their city or area name.
  • Page 22: How Do I Create A Trip With Multiple Stops

    This case study will show you how to set a multi-stop trip by entering multiple waypoints. The address we will be using in this example is: Note: The below address is fictitious and used as an example only. 1 Navman Street Horley Surrey...
  • Page 23 S-Series Tap Add. The Add to Trip Menu will display. Tap Address. The Destination Search screen will open. Note: You can also add waypoints using favourites, recent destinations, POI locations and NavPix. 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed.
  • Page 24 From the Destination Search screen, tap Street Address. The Keyboard screen will display. Use the Keyboard screen to enter Navman Street as the street name of your destination, then tap the search result. Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring areas, and common street names will produce search results ordered by their city or area name.
  • Page 25 S-Series Complete one or more of the following: If you want to ... Then ... tap Add. add another waypoint The Add To Trip Menu will display. Note: Waypoints added after a multi-stop return to step 1a. trip has commenced will not be included in the current route.
  • Page 26: How Do I Skip A Waypoint During A Multi-Stop Trip

    S-Series How do I skip a waypoint during a multi-stop trip? To skip a waypoint during a multi-stop trip, complete the following: Tap the map. The Map Menu will display. Tap Route, then Skip Waypoint. The next waypoint will be skipped and the route recalculated to the following waypoint.
  • Page 27: How Do I Search For A Point Of Interest (Poi)

    S-Series How do I search for a Point of Interest (POI)? A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by type, such as petrol stations, parks, beaches and museums. Select a POI using the Destination Search, Keyboard and Preview screens, which used together form a POI-entry wizard.
  • Page 28 S-Series 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. From the Destination Search screen, tap The Select a map screen will display.
  • Page 29: Search For A Poi

    S-Series 4. Search for a POI Either tap Search by name to search in all POI categories, or select a category from the list. The Keyboard screen will display. Use the Keyboard screen to search for Waterloo Railway Station as your destination, then tap the search result.
  • Page 30: How Do I Save Favourites And My Home

    S-Series How do I save Favourites and My Home? You can save up to 200 destinations as favourites, one of which can be saved as My Home. You can save a favourite from the Preview screen after searching for an address, or from the Map Menu on the 3D or 2D Map screens.
  • Page 31: How Do I Navigate To A Favourite

    Tap the Favourite destination you want to travel to. The Preview screen will display. Your Navman will calculate the route from your current location. The 3D Map screen will display. How do I navigate to My Home? If you have not set an address as My Home, the first time you try to navigate to My Home you will be prompted to search for an address using the address-entry wizard.
  • Page 32: How Do I Edit The Name Of A Favourite

    S-Series How do I edit the name of a Favourite? From the Favourite Destinations screen, select a favourite to edit. The Favourite Preview screen will display. Tap Edit. The Edit Name screen will display. To edit the name of the favourite, tap After you have edited the favourite name, tap The Edit Name screen will display.
  • Page 33: How Do I Delete A Favourite

    S-Series How do I delete a Favourite? From the Favourite Destinations screen, select a favourite to delete. The Preview screen will display. Tap Delete. The favourite is deleted. The Favourite Destinations screen will display.
  • Page 34: How Do I Navigate To A Recent Location

    S-Series How do I navigate to a recent location? To make navigating to an address easier, your Navman will automatically save all your start locations and destinations in a list of recent locations. Tap a recent location. The Preview screen will display.
  • Page 35: How Do I View My Route

    S-Series How do I view my route? When a route has been calculated, the 3D Map screen will display. You will be directed to your destination by spoken and visual instructions. The Map button cycles through the 3D Map, 2D Map, Traffic Overview, Route Overview and Turn-by-Turn™ screens. 3D Map screen The 3D Map screen displays your current position and follows your direction of travel.
  • Page 36 Mute/unmute volume. and compass information. TMC traffic status indicator. For more information, see “How does my Navman receive traffic information?” on page 76. Bluetooth and phone indicator. The icon is grey when Bluetooth is on but a phone has not been paired.
  • Page 37: Map Screen

    S-Series 2D Map screen The 2D Map screen shows your current position (if a GPS fix is active) and surrounding street names. If a route has been calculated, the route and turns are highlighted. The 2D Map screen follows your direction of travel unless the Map Display preference is set to North (see “Map Display”...
  • Page 38 Mute/unmute volume. and compass information. TMC traffic status indicator. For more information, see “How does my Navman receive traffic information?” on page 76. Bluetooth and phone indicator. The icon is grey when Bluetooth is on but a phone has not been paired.
  • Page 39: Traffic Overview Screen

    S-Series Traffic Overview screen Depending on your Navman model, traffic information may not be available or may require a traffic cradle. The Traffic Overview screen displays a general overview of the traffic situation on your route, including all events in the immediate vicinity.
  • Page 40 GPS and compass information. TMC traffic status indicator. For more information, see “How does my Navman receive traffic information?” on page 76. Bluetooth and phone indicator. The icon is grey when Bluetooth is on but a phone has not been paired.
  • Page 41: Route Overview Screen

    S-Series Route Overview screen The Route Overview screen gives you a bird’s eye view of your trip. Note: A route must first have been calculated for this screen to be available. Tap and drag the screen, to move across the map. Tap the map to view the Map Menu (see "How do I use the Map Menu?"...
  • Page 42 GPS and compass information. TMC traffic status indicator. For more information, see “How does my Navman receive traffic information?” on page 76. Bluetooth and phone indicator. The icon is grey when Bluetooth is on but a phone has not been paired.
  • Page 43: Turn-By-Turn Screen

    S-Series Turn-by-Turn screen The Turn-by-Turn screen displays the next four turns of your route, the turn direction, the street name and the distance to the turn. You can view all the turns in the list, using the up and down arrows. A route must first have been calculated for this screen to be available.
  • Page 44 GPS and compass information. TMC traffic status indicator. For more information, see “How does my Navman receive traffic information?” on page 76. Bluetooth and phone indicator. The icon is grey when Bluetooth is on but a phone has not been paired.
  • Page 45: How Do I Use The Map Menu

    Map Menu options The following options are available via the Map Menu: Menu Option Description Calculates a route from your current location, if your Navman has a GPS fix. Navigate To Displays the Preview screen from where you can: Show Details...
  • Page 46: How Do I Avoid An Area

    S-Series How do I avoid an area? Your Navman can calculate a route that avoids a specified area on the map. Avoid Areas are displayed as shaded areas. CAUTION If no alternative route around an Avoid Area exists, the route calculation will fail.
  • Page 47: How Do I Preview A Route

    S-Series How do I preview a route? Route demonstration allows you to: Preview a route. Plan and view a route without a GPS fix, such as when you are inside a building. The following steps will show you how to preview one route. 1.
  • Page 48: How Do I View My Route Statistics

    S-Series How do I view my route statistics? The Navman provides information on your: distance travelled average speed maximum speed time taken for trip stationary time. Trip information is presented in two different ways. These are: information for the current trip information for all trips to date, or since the tripmeter was last reset.
  • Page 49: How Do I View Statistics Of My Trips To Date

    S-Series How do I view statistics of my trips to date? The Tripmeter - Global screen is used to view statistical information for all of your trips to date, or since the trip meter was last reset. The Tripmeter - Global screen will display. Complete one of the following: If you want to ...
  • Page 50: How Do I View My Trip Logs

    S-Series How do I view my trip logs? Note: Trip Recorder is only available on some models. The Trip Recorder screen is used to record trip logs of your current trip. The Trip Recorder only records trip logs if you have chosen to record the logs. The Trip Recorder screen will display.
  • Page 51: How Do I Manage My Navpix

    Pictures with a GPS fix are called NavPix and can be used to navigate to the photographed location. Album management The albums contain all your NavPix and display them as thumbnails. You can store your NavPix in customizable albums on the Navman internal memory or on your memory card. Element Description Displays the Select an Album screen, from where you can select another album.
  • Page 52 How do I copy NavPix to my memory card? NavPix can be copied from the albums on your Navman internal memory to your memory card and vice versa. Note: The first time a NavPix is copied to your memory card, a folder will be created on the memory card called NavPix.
  • Page 53: Navpix Management

    NavPix. Allows you to edit the name of the NavPix using the Keyboard screen. Edit Deletes a NavPix from the album on your Navman or memory card. Delete Your route will be calculated and displayed on the 3D Map screen.
  • Page 54: How Do I Add Or Edit A Navpix Description

    S-Series How do I view a NavPix in full-screen? From the NavPix Details screen, tap the thumbnail of the NavPix. The NavPix will appear in full-screen. Note: The icons disappear after a few seconds; tap the screen to have them reappear. Complete the following: If you want to ...
  • Page 55: How Do I Navigate To A Navpix

    How do I navigate to a NavPix? Your Navman contains preinstalled NavPix that you can navigate to. If you have not yet navigated to a NavPix, three of the preinstalled NavPix will display on the Go To NavPix screen. Otherwise, three of your recently used NavPix are displayed.
  • Page 56: How Do I Save A Navpix To A Favourite

    S-Series How do I save a NavPix to a favourite? Note: When a NavPix is saved to an existing favourite, only the image, and not the GPS coordinates, are associated with the favourite. From the Album screen, select and tap a NavPix. The NavPix Details screen will display.
  • Page 57: How Do I Save A Navpix To A Poi

    S-Series How do I save a NavPix to a POI? Note: Only a NavPix with embedded GPS coordinates can be saved as a POI. From the Album screen, select and tap a NavPix. The NavPix Details screen will display. From the NavPix Details screen, tap Assign. The Save Photo screen will display.
  • Page 58: What Is Navman Connect (Local Search)

    Using Navman Connect you can search for and navigate to POIs using your Navman or you can navigate to POIs you have downloaded using NavDesk. Note: To search for POIs using your Navman, you must pair your Navman with your mobile phone. If your Navman isn’t paired with your mobile phone then the Bluetooth screen will display.
  • Page 59: How Do I Search For A Poi Using Navman Connect

    S-Series How do I search for a POI using Navman Connect? From the Search Location screen tap and select your location. The Preview screen will display. The Available Services screen will display. From the Available Services screen tap and select your search service.
  • Page 60 S-Series Tap a POI. The Preview screen will display. Complete one of the following: If you want to ... Then ... navigate to your selected destination Your route is calculated and displayed on the 3D Map screen. view your position on the map screen tap the map to display the position on the 2D Map screen..
  • Page 61: How Do I Make A Hands-Free Call

    Models with Bluetooth capabilities can exchange information over a distance of about 10 metres (30 feet) without requiring a physical connection. Note: Before you can use this feature you must pair your mobile phone with your Navman. Ensure that the Bluetooth wireless feature of your mobile phone is turned on before you begin pairing.
  • Page 62: How Can I Make A Phone Call Using The Dial Screen

    To clear the entire number, tap and hold Tip: International calls require a country code to be included in the phone number. On your Navman, the country code is separated from the rest of the number sequence by a +. If you are making an international call, tap and hold 0 until the + sign displays.
  • Page 63: How Do I Receive A Phone Call

    Refer to your mobile phone user manual for more information. Note: If there are no contacts on your Navman, you will be prompted to transfer the contact list from your phone. Your phone may disconnect, then reconnect to your Navman during the transfer.
  • Page 64: How Do I View My Call History

    How do I view my call history? From the Call log screen you can view a list of Incoming Calls, Outgoing Calls and Missed Calls. Note: The call history lists the calls made during the time your Navman is connected to a mobile phone. Icon...
  • Page 65: How Do I Receive Current Traffic Information

    Your Navman or Traffic module is connecting to the TMC service. Your Navman or Traffic module cannot receive TMC data. This may be due to poor radio coverage in the local vicinity.
  • Page 66: How Will I Know When A Traffic Event Occurs

    Traffic preferences?" on page 80. When travelling through an area in which you can receive traffic status, your Navman will decode these events and display them on-screen. An icon will display at the event location on the map screens, and an audible warning is given if an event is on your route.
  • Page 67: How Do I View A List Of All Events On My Route

    How do I view a list of all events on my route? Your Navman creates a list of events as they are received, which is displayed on the Event List screen. This screen can only be viewed if the TMC icon is green or orange.
  • Page 68: How Do I View Traffic Details

    S-Series How do I view traffic details? There are several ways to view details of an event received by your Navman. Choose one of the following: Location Option Tap the Event message when it appears on screen. From any of the screens used to view your route The Event Details screen will display.
  • Page 69: How Do I Know If A Detour Is Recommended

    S-Series How do I know if a detour is recommended? When a Traffic or Clearance event occurs on your route, a detour will always be recommended. The detour event message will display in the status bar on map screens. Note: Detours are only recommended for Traffic or Clearance Events on a calculated route. How do I avoid an event on my route? From the Traffic Overview screen, tap From the Event List screen, tap the event.
  • Page 70: Traffic Messages

    If a detour is recommended, one of the following messages will display: Message Description Finding detour..Your Navman is calculating a new route. During calculation, the % complete will display. Note: Exiting this screen before the new route is calculated will cancel the operation. Recalculating route..Detour distance..
  • Page 71: What Can I Customize

    S-Series What can I customize? There are various customization options available to enhance your navigation experience. To move forward through the Preferences screens, tap To revisit the previous screen, tap...
  • Page 72: Route Options

    S-Series Route Options You can enhance your navigation experience by modifying aspects of your route and route calculation. Route Calculation 1/4 Complete the following: If you want to... Then... change the route type move the Route Type slider towards Fastest time to give high priority to the fastest time when calculating a route.
  • Page 73: Road Types 2/4

    S-Series Road Types 2/4 Complete the following: If you want to... Then... avoid toll roads select the Toll roads check box in the Avoid column. receive a warning if your route includes select the Toll roads check box in the Warn column. The warning will display at the start of toll roads every trip containing a toll road.
  • Page 74: Driver Alerts 3/4

    If you want to... Then... enable a visual warning if the Main Menu select the Warn me not to operate my Navman while driving check box. screen is accessed in a moving vehicle enable a warning chime when travelling at or select the Alert me when my speed exceeds check box.
  • Page 75: Data Recording 4/4

    S-Series Data Recording 4/4 Complete the following: If you want to... Then... record a GPS log of your trips select the Enable GPS data logging check box. record mileage that can be select the Enable trip recording check box. imported into NavDesk to create expense reports Your preferences are automatically saved.
  • Page 76: Map Display

    S-Series Map Display You can change the look and behaviour of the Map screens by customizing the Map Display preferences. Map Display 1/3 Complete the following: If you want to... Then... change the map colour scheme select your preferred scheme from the Map Scheme box. set the screen contrast to automatically adjust select the Auto day/night option.
  • Page 77: Map Display 2/3

    S-Series Map Display 2/3 Complete the following: If you want to... Then... select the Auto-zoom on main map screens check box. If selected, the 3D Map screen will enable automatic zooming during navigation automatically zoom in or out, depending on your speed, to allow optimal viewing of your route.
  • Page 78: Select Map 3/3

    S-Series Select Map 3/3 Complete the following: If you want to... Then... use maps from a different continent select a different continent from the maps you are currently using. When selected, the maps for the new continent will load and the 3D Map screen will display. Your preferences are automatically saved.
  • Page 79: Map Pois

    S-Series Map POIs Points of Interest (POIs) are grouped into categories. You may choose to either display (or hide) icons of all POI categories on the map screens, or only display the icons from selected categories. For example, you may only be interested in entertainment venues and want to disable other categories such as schools.
  • Page 80: Volume

    S-Series Volume Complete the following: If you want to... Then... increase or decrease the volume move the Volume slider towards High to increase the volume. move the Volume slider towards Low to decrease the volume. hear a tone when you tap the touch select the Audio check box.
  • Page 81: Screen Display

    Screen Brightness slider towards Dim to decrease screen brightness. Warning: Your Navman can heat up when the Brightness scale is set above 70% - i.e., when more than seven rectangles are coloured - therefore, use lower brightness whenever acceptable.
  • Page 82: Poi Alerts

    NavDesk (Custom POIs). You may also be able to set warnings to certain POI categories that were preinstalled on your Navman or available by subscription, such as Safety Cameras. If you have a route set, the warnings will occur when you are a certain distance (set by the Warning Distance preference) from the POI on your route.
  • Page 83: Gps

    S-Series GPS Status 1/2 Signals are transmitted by Global Positioning System (GPS) satellites orbiting the Earth. The GPS Status screen provides a visual representation of the information being received. Latitude and longitude are displayed, along with ground speed and the heading in degrees. The strength of each satellite is displayed on a bar chart.
  • Page 84: Set Gps Mode 2/2

    S-Series Set GPS Mode 2/2 Complete the following: If you want to... Then... use GPS select the Normal option. use WAAS select the WAAS (only available in USA) option. use EGNOS select the EGNOS (only available in Europe) option. Note: WAAS - Wide Area Augmentation System is a navigation system developed for civil aviation by the Federal Aviation Administration (FAA), a division of the United States Department of Transportation (DOT).
  • Page 85: Language

    S-Series Language Complete the following: If you want to... Then... enable voice guidance select the Enable voice guidance check box. change the voice scheme select your preferred voice scheme from the Voice Guidance box. Note: Only voice schemes that are compatible with the chosen language are displayed. change the on-screen language select your preferred language from the Language box and tap Yes.
  • Page 86: Traffic

    S-Series Traffic You can view your current traffic system status and change options by customizing the traffic preferences. Traffic System Status From the Traffic Overview screen: The Tuner section displays the name and frequency of the radio station currently being used to receive traffic event information.
  • Page 87: Traffic Event Notification

    S-Series Traffic Event Notification From the Traffic Overview screen: Complete the following: If you want to ... Then ... turn on/ off traffic event notification select the Notify me about nearby traffic events check box to receive traffic event notification. clear the Notify me about nearby traffic events check box to turn off traffic event notification.
  • Page 88: Select Event Sorting Type

    S-Series Select event sorting type From the Traffic Overview screen: Complete one the following: If you want to ... Then ... sort events by distance select the Distance check box. sort events by road name select the Road name check box. sort events by age select the Age check box only see events that occur on your route...
  • Page 89: Power

    S-Series Power The Battery Status bar shows the percentage of power left in the Navman battery; the words External Power will display when the battery is charging from an external power source. To charge the battery, see "Internal battery" on page 14.
  • Page 90: Select Keyboard

    Predictive text allows addresses to be searched by a single key-press for each letter, as opposed to the multiple key- presses. As you enter a letter of an address, your Navman will compare all possible combinations against the maps you have installed and determine which address you intended to type.
  • Page 91: Units

    S-Series Units You can change the units used by your Navman by customizing the measurements preferences. Units 1/2 Complete the following: If you want to... Then... change the time format select either the 12 hour or 24 hour option change the distance units select your preferred distance unit type from the Distance Units options.
  • Page 92: Units 2/2

    S-Series Units 2/2 Complete the following: If you want to ... Then ... change the latitude, longitude position select either the Decimal degrees or the Degrees, minutes and seconds option. format Your preferences are automatically saved.
  • Page 93: Start-Up

    Complete the following: If you want to... Then... show the Tutorial when you turn on your Navman select the Show the Tutorial checkbox. show the Language Selection screen when you turn on select the Show the Language Selection screen checkbox.
  • Page 94: Bluetooth Preferences

    S-Series Bluetooth preferences If you want to… Then… enable Bluetooth select the Enable Bluetooth check box. to automatically connect to the last select the Auto-connect to last paired device check box. paired mobile phone Note: This option is not available on all models. Your preferences are automatically saved.
  • Page 95: Saved Information

    S-Series Saved Information Complete the following: If you want to... Then... delete recent locations tap Delete Recent Locations. delete favourites tap Delete Favourite Destinations. delete avoid areas tap Delete Avoid Areas. restore factory default settings tap Restore Factory Defaults. Note: The Restore Factory Defaults option does not delete recent locations or saved favourite destinations.
  • Page 96: Tutorial

    S-Series Tutorial The Tutorial displays when you turn your Navman on, unless you have cleared the Show tutorial on start-up check box. You can view the Tutorial at any other time: To prevent the Tutorial from displaying again on startup, clear the Show tutorial on startup check box to clear it.
  • Page 97: About

    S-Series About This preference contains copyright and trademark information. Shop Demo Complete the following: If you want to... Then... enable a shop demonstration of tap Shop Demo on the preference screen. After a short delay, a route will be demostrated. Smart to be played...
  • Page 98: What Is Navdesk

    Install NavDesk on your computer (see "How do I install NavDesk onto my computer?" on page 99). Check for software updates for NavDesk on your Navman (see "How do I keep NavDesk up-to-date?" on page 101). Install one or more maps on your Navman (see "How do I install maps onto my Navman?" on page 105).
  • Page 99: How Do I Install Navdesk Onto My Computer

    ) on the bottom of your Navman. Tip: Where possible, plug the USB cable into a USB port at the back of your computer. Slide the Power switch to the ON position to turn your Navman on. The following screen will display on your Navman.
  • Page 100: Navdesk Features

    Application used to install and manage maps. My Maps Information on your current subscriptions, including safety camera subscription. My Subscription Application used to transfer NavPix from your Navman to your computer. The software enables NavAlbum you to: Manage albums Copy...
  • Page 101: How Do I Keep Navdesk Up-To-Date

    S-Series How do I keep NavDesk up-to-date? We recommend that you regularly use NavDesk to check the Navman server for NavDesk software updates. How do I update NavDesk? Start All Programs Navman NavDesk Tools Options General Select Auto check for updates checkbox.
  • Page 102: Navman Connect

    Navman. Tip: Before you begin, ensure your Navman is correctly plugged into your computer: Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub); plug the small end into on the side of your Navman.
  • Page 103: How Do I Install Pois From My Computer To My Navman

    The POI is deleted from your Navman. Repeat step 1 and 2 to delete more POIs to your Navman. Note: To delete all the POIs installed on your Navman, select the Select All check box and then click Delete Selected.
  • Page 104: My Maps

    A drop down list of continents that have maps available for your Navman. Continent A list of maps on the DVD or available for purchase via the Navman store website. Map Source A list of maps installed on your Navman.
  • Page 105: How Do I Install Maps Onto My Navman

    Your Navman comes with one or more pre-activated maps. You can install maps from the enclosed DVDs to a memory card or your Navman internal memory; however you may need to purchase a Map Product Key to activate the maps.
  • Page 106 The selected maps will be installed and change colour to green. 10. To use your Navman, disconnect the USB cable. WARNING Do not disconnect the USB cable from the Navman USB Socket until the installed map or maps have changed colour to green.
  • Page 107: How Do I Remove Maps From My Navman

    Click My Maps. The My Maps application will display. From the My Navman panel, select the check box next to the map you want to remove. Click Remove Maps to remove the selected maps. Confirm that you want to remove the selected map when prompted.
  • Page 108: What Is A Major Road Network Map

    How do I install or reinstall a Major Road Network map? Major Road Network maps can be installed to a new memory card or reinstalled to your Navman the same way detailed maps are installed. For more information, see "How do I install maps from DVD?" on page 105.
  • Page 109: Navalbum

    Click the View all pictures button to display all pictures stored in the NavPix library on your computer. Displays a list of albums stored on the Navman internal memory and on the memory card if one My Navman albums is inserted.
  • Page 110: Toolbar

    Click to transfer the selected NavPix to your Navman. Transfer to your computer If you are viewing NavPix in the Navman library this will display as Transfer to your computer. Click to transfer the selected NavPix to the NavPix library on your computer.
  • Page 111: How Do I Use Navalbum

    How do I use NavAlbum? Tip: Before you begin, ensure your Navman is correctly plugged into your computer: Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub); plug the small end into on the side of your Navman.
  • Page 112: What Else Can I Do With Pictures And Albums On My Computer

    NavPix upload to the NavPix website. online library select the NavPix, right click and then select Upload to Navman. NavPix online library screenw ill display. Enter your Username and Password to access the NavPix website. Note: If you do not have a NavPix account, click Do you need an account? Click here to register to visit the NavPix website and register.
  • Page 113: Navalbum Preferences

    S-Series NavAlbum Preferences Tools Options NavAlbum Complete one of the following: If you want to ... Then ... click Change. change your NavPix location on your The Save As dialog box will open. computer select a location for your NavPix library. click Save.
  • Page 114: Image Search

    Image Search is a NavDesk application powered by Flickr™ allowing you to download photos and import them to NavAlbum. You can then upload the photo to either the NavPix or Flickr websites, transfer photos to your Navman, export pictures to Google Earth or search for other NavPix near the longitude and latitude of your NavPix.
  • Page 115: Mileage Reporter

    Navman or export to a report (.csv). Report data buttons To set the trip recording preference on your Navman, see “Data Recording” on page 75. How do I input my trip data? Select Show All in the Timeframe section.
  • Page 116: How Do I Export A Mileage Report

    If you want to ... Then ... receive a warning when mileage logs are Select the Warn me when deleting all log files from my Navman checkbox. deleted from your device calculate fuel economy preference by select the Distance per volume option.
  • Page 117: My Subscriptions

    Purchase a Subscription To purchase a subscription to safety camera information, on the Subscriptions menu, select the country for which you want to purchase the safety camera and then select Purchase an activation key from the Navman store. The Navman Store website will open.
  • Page 118: Activate Your Subscription

    How do I update Safety Camera information on my Navman? Start All Programs Navman NavDesk My Subscription My Navman section will display a list of subscriptions already installed on your device. Icon Description Expired subscriptions. right click to purchase a new subscription. Yellow Available subscriptions.
  • Page 119: Custom Pois

    New Category option, then type a name for the POI category. Navman is not responsible for the content or accuracy of the information or the reliability or availability of these websites. The use of information regarding safety camera locations may be subject to local laws in the country of use. You are responsible for checking that...
  • Page 120: How Do I Delete A Custom Poi File From My Navman

    Click on Add to device button to add the POI to your Navman. Note: Each POI file corresponds to a POI category; for example, Hotels .csv will be listed in your Navman as the Hotels category. How do I delete a Custom POI File from my Navman? On the Installed POIs section click Delete next to the file name.
  • Page 121: Voice Transfer

    The Voice Transfer application is part of NavDesk and allows you to install or remove voice files. Voice files take up space on your Navman’s internal memory. If you do not use a voice file, you can remove it to free up space.
  • Page 122: How Do I Backup My Navman

    S-Series How do I backup my Navman? You can save backups of the following information, and later restore them to your Navman: Favourites and My Home Preferences, including Point of Interest and NavPix preferences Multi-stop trips Recent locations. How do I Backup my Navman?
  • Page 123: Reference

    CAUTION Do not to apply pressure to the centre of the memory card. How do I remove a Memory Card? Before removing the memory card, turn off the Navman. Next, gently push the top edge of the card to release it, and pull it out of the slot.
  • Page 124: Point Of Interest Categories

    S-Series Point of Interest categories Icon Description Icon Description Airline Access Airport Amusement Park Arts or Cultural Centre Bank Beach Boat Ramp Breakdown Service, Car Repair Facility Building Camping Ground Car Dealer Caravan Park, Trailer Park Cash Dispenser Casino Centre of Settlement Church Cinema City Centre...
  • Page 125 Branded Points of Interest Branded Points of Interest are available on some maps. These include well-known restaurants, accommodation providers, tourist attractions, petrol stations, etc. The icon will usually display the company logo. Point of Interest categories by Navman Icon Description...
  • Page 126: Traffic And Other Tmc Events

    S-Series Traffic and other TMC Events Each TMC Event is sorted in to one of nine categories. When an Event is received, one of the following icons will display: Event Avoided Event Message Type Event Description There is a dangerous situation on the route; for example, people Danger are on the road.
  • Page 127: Safety Camera Pois

    Safety Camera POIs Navman products are designed to be used as an aid to safer driving. You can receive messages to alert you to locations of safety cameras, which will enable you to monitor your speed through these areas. Navman does not warrant that all types and locations of safety camera data are available, as cameras may be removed, relocated or new cameras installed.
  • Page 128 Microsoft, Windows, Windows Vista, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All rights reserved. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Navman Technology NZ Ltd is under license.
  • Page 129: For More Information

    You will find a fully searchable Frequently Asked Questions (FAQs) section for all Navman products. At least 90% of our customers find answers to their questions at support.navman.com, however if you require further support, you can use the online email option to contact us.
  • Page 130 DOC-67-B...

This manual is also suitable for:

S30 3dS50 3dS70 3d

Table of Contents