Restoring Default Settings - Navman S300 User Manual

S300 - Default settings

6.0 Restoring default settings

!
WARNING: Restoring factory default settings clears
all stored data and all user selected settings!
To restore all default factory settings
1) make sure the unit is off
2) press and hold
3) while holding
When restoring default settings
The screen displays the message 'reset all' and a counter. If you
stop any time down to 1 on the counter, default settings will not
be restored and all current settings and data will not be cleared.
After pressing the fifth time, the 'reset done' message appears
and all settings are restored to factory defaults. A controlled
shutdown is executed automatically after defaults are restored.
After factory default settings have been restored, when the
S300 is next turned on you will need to enter setup if you want
to display local time or adjust other setting preferences.
1-24
to turn the unit on – DO NOT RELEASE
, press five times
S300
NAVMAN