LINOVISION IOT-S500L Quick Start Manual page 9

specific packets are being sent, the device will re-join.
ADR Mode Allow network server to adjust data rate of the device.
Tx Power Transmit power of device.
Note:
1) Please contact sales representative for device EUI list if there are many units.
2) Please contact sales representative if you need random App keys before purchase.
3) Select OTAA mode if you use IoT Cloudto manage devices.
4) Only OTAA mode supports rejoin mode.
LoRaWAN Frequency Settings:
Go to Setting->LoRaWANSettings of ToolBox App to select the supported frequency and select
channels to send uplinks.Make sure the channels match the LoRaWAN
If device frequency is one of CN470/AU915/US915,you can enter the index of the channel that
you want to enable in the input box,making them separated by commas.
Examples:
1, 40: Enabling Channel 1 and Channel 40
1-40:Enabling Channel 1 to Channel 40
1-40,60:Enabling Channel 1 to Channel 40 and Channel 60
All: Enabling all channels
Null: Indicates that all channels are disabled
®
gateway.
9