Table of Contents
Advertisement
Safety Precautions
Linovision will not shoulder responsibility for any losses or damages resulting from not
following the instructions of this operating guide.
❖
The device must not be modified in any way.
❖
Do not expose the PIR lens to direct sunlight.
Do not paint or clean the PIR lens, or it will affect the detection of the device.
❖
❖
Do not place the device where the temperature is below/above the operating range.
Do not place the device close to objects with naked flames, heat source (oven or sunlight),
❖
cold source, liquid and extreme temperature changes.
❖
The device is not intended to be used as a reference sensor, and Linovision will not
take responsibility for any damages which may result from inaccurate readings.
When installing the battery, please install it accurately, and do not install the reverse or
❖
wrong model.
❖
Remove the battery if the device will not be used for a long time. Otherwise, the battery will
leak and damage the device.
❖
The device must never be subjected to shocks or impacts.
Declaration of Conformity
IOT-S500L conforms with the essential requirements and other relevant provisions of the CE,
FCC, and RoHS.
Copyright © 2011-2022 Linovision All rights reserved
For assistance, please contact
Linovision technical support:
Email: sales@Linovision.com
Tel: +86571-86708175
2
Advertisement
Table of Contents
