Maintenance; 1Upgrade; 2Backup - LINOVISION IOT-S500L Quick Start Manual

3. Enable one of IOT-S500L status and configure a 2-bytehexadecimal command (This
command is pre-definedin LoRa D2D agent device). When IOT-S500L detects this status, it
will send the control command to corresponding LoRa D2Dagent devices.
Note: When this feature is enabled, the device will not send data to LoRaWAN
IOT-S500L PIR or lightstatus changes.

3.6 Maintenance

3.6.1 Upgrade
1. Download firmware from Linovision website to your smartphone.
2. Open ToolBox App and click "Browse" to import firmware and upgrade the device.
Note:
1) Operation on ToolBox is not supported duringupgrade.
2) Only Android version ToolBox supports the upgrade feature.

3.6.2Backup

IOT-S500L supports configuration backup for easy and quick device configuration in bulk.
Backup is allowed only for devices with the same model and LoRa frequency band.
®
network server if
12