Linear m&s VMC1 Instructions Manual page 8

Master Station
VMC1 Master Terminations
COM2
MUS1
MUS2
AUX
MUSIC INPUT (See Figure 4)
The VMC1 Master is outfitted with a 3.5mm music input jack on the front that is pre-wired to the music input
connector.
LCH
GND
RCH
LOCK OUTPUT (See Figure 5)
LK1
LK2
LK3
COM +
INPUTS / OUTPUTS (See Figure 5)
G/STAT
COM +
AUXILLIARY SWITCHES (See Figure 5)
AUX1
AUX2
8
Connects to Corresponding terminal at Room and Door stations
(Blue from terminal block)
Connects to Corresponding terminal at Room stations only
(Brown White from terminal block)
Connects to Corresponding terminal at Room Stations only
(Brown from terminal block)
Connects to Yellow AUX Activation Wires from Room stations
Left channel audio (White Wire)
Audio output GND (Blue Wire)
Right channel audio (Red Wire)
Switched negative for door lock 1 relay
Switched negative for door lock 2 relay
Switched negative for door lock 3 relay
Positive 12V for all three lock relays
(Relay coil resistance should be 240 ohm or greater)
Connects to optional reed switch for Door Open Status Ground
Connects to optional reed switch or AUX 1, AUX 2 (12V)
Connects to optional activation Device #1 Ground
Connects to optional activation Device # 2 Ground
Figure 4