Linear m&s VMC1 Instructions Manual page 19

STATION OPTIONS MENU
Selections Description
PREV/NEXT
ADDITIONAL Not used at this time
DISPLAY /
VIDEO ROOM STN
30 Sec Duration of Video Out Feed after doorbell
DISP T-OUT rings
1/5/10/20/60 Min
# CAM DOOR STN Shows number of door stations with
cameras
# NON-CAM Number of NON Camera door stations in
DOOR STN system
ADDITIONAL CAM Number of NTSC non door cameras in
system
Station Options Notes
ADDITIONAL Additional Display is Default & used where extra display(s) or monitors are connected
DISPLAY / via the VIDEO OUT terminals
VIDEO ROOM
STN
30 Sec Setting changes Video Out - Determines time duration for the Video Out display in
DISP T-OUT seconds when the video from the camera activated by a door chime before switching
1/5/10/20/60 Min back to default display
# CAM DOOR STN Sets the number of door stations that have an built-in external camera.
Options are 1, 2 or 3.
If "1 CAM DOOR STN" is selected, door station No.1 (wired to VLC1) is door station
with camera.
If "2 CAM DOOR STN" is selected, door stations 1 & 2 (wired to VLC1 and VLC2) are
door stations with cameras.
# NON-CAM
Sets number of door stations with no built-in or associated external camera. Options are
DOOR STN 1, 2 or 3.
If "2 NON-CAM DOOR STN" is selected, door stations 2 & 3 (wired to VLC2 and VLC3)
are door stations without cameras.
If "3 NON-CAM DOOR STN" is selected, door station No. 3 (wired to VLC3) is door
station without a camera.
Master Station Programming
Factory Installer/ Consumer
Default
N/A Consumer
Installer
30 seconds Consumer
1 Installer
0 Installer
0 Installer
19