Linear m&s VMC1 Instructions Manual page 2

IMPORTANT SAFETY INSTRUCTIONS
SHOCK HAZARD
This sign alerts user about un-insulated
"dangerous voltage" that poses risk of electric shock.
Read Instructions: All safety and
operating instructions should be read
before installing or operating the VMC1
Video Intercom system.
Retain Instructions: The safety and
operating instructions should be retained
for future reference.
Heed Warnings: All warnings on the
appliance and in the operating instructions
should be adhered to.
Follow Instructions - All operating and use
instructions should be followed.
Water and Moisture - The appliance
should not be used near water - for
example: near bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or
near a swimming pool, and the like. Doing
so can create a fire or shock hazards and
impair the warranty.
Attachments - Do not use attachments not
recommended by the product manufacturer
as they may cause hazards.
Ventilation - The appliance should be
situated so that its location or position does
not interfere with its proper ventilation. For
example, the appliance should not be
situated on a bed, sofa, rug, or similar
surface that may block the ventilation
openings: or, placed in a built in installation,
such as a bookcase or cabinet that may
impede the flow of air to the ventilation
openings
Heat -The appliance should be situated
away from heat sources such as radiators,
heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
Power Sources - The appliance should be
connected to a power supply only of the
type described in the operating instructions
or as marked on the appliance.
Grounding or Polarization - Precautions
should be taken so that the grounding or
polarization means of an appliance is not
Keep this manual in a safe place for future reference. To replace this manual, download available from
2
defeated.
Power Lines - Locate outdoor antennas
away from power lines.
Outdoor Antenna Grounding - If an
outside antenna is connected to the
receiver, be sure the antenna system is
grounded so as to provide some protection
against voltage surges and built up static
charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70 1984,
provides information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead in wire
to an antenna discharge unit, size of
grounding conductors, location of antenna
discharge unit, connection to grounding
electrodes, and requirements for the
grounding electrode (see figure).
Object and Liquid Entry - Never push
objects of any kind into this product through
openings as they may touch dangerous
voltage points or short out parts that could
result in a fire or electric shock. Never spill
liquid of any kind on the product.
Servicing - The user should not attempt
to service the appliance beyond that
described in the operating instructions.
All other servicing should be referred
www.linearcorp.com
Linear Web site:
CAUTION!
This sign warns user about important
operating, maintenance, and servicing instructions for
this product.
to qualified service
Damage Requiring Service - The
appliance should be serviced by qualified
service personnel when:
• The power supply cord or the plug
has been damaged; or Objects have
fallen, or liquid has been spilled into
the appliance; or
• The appliance has been exposed to
rain; or
• The appliance does not appear to
operate normally or exhibits a marked
change in performance; or
• The appliance has been dropped, or
the enclosure damaged.
When the product exhibits a distinct
change in performance - this indicates a
need for service.
Replacement Parts: When replacement
parts are required, be sure the service
technician has used replacement parts
specified by the manufacturer or have the
same characteristics as the original part.
Unauthorized substitutions may result in
fire, electric shock, or other hazards.
Safety Check - Upon completion of any
service or repairs to this product, ask
the service technician to perform safety
checks to determine that the product is in
proper operating condition.
Wall or Ceiling Mounting - The product
should be mounted to a wall only as
recommended by the manufacturer.
personnel.