OpenEye OE-C7022-FPW Quick Start Manual

OpenEye OE-C7022-FPW Quick Start Manual

Outdoor repositionable ip dome camera
Hide thumbs Also See for OE-C7022-FPW:

Advertisement

Quick Links

1. General Specifications

Outdoor Repositionable
Model No.
IP Dome Camera
Image Sensor
Quick Start Guide
IP Rating
Wide Dynamic Range
OE-C7022-FPW
model no:
Minimum Illumination @ 50 IRE
OE-C7022-APW
Minimum Illumination @ 30 IRE
Day / Night
Resolution
8 6 ° /
3 5 0 °
9 0 °
4 9 . 2 ° ~ 1 0 . 5 2 °
Focal Length
Iris Control
Video Output
White Balance
Please carefully read these instructions before using this product.
Auto White Balance Range
Save this document for future use.
32945AA
Backlight Compensation
Auto Gain Control
Operating Temperature
Power Consumption
Rated Amperage
Imput Voltage
Weight
Dimensions
Housing / Dome Cover
23221 E Knox Ave
Liberty Lake, WA 99019
1.888.542.1103
2. Products and
Accessories
OE-C7022
FPW
APW
Sony 1/2.8" CMOS
IP66 (Outdoor)
True WDR
Color: 4.0 Lux @ F1.6
Color : 4.6 Lux @ F3.5
B/W: 0.8 Lux @ F1.6
B/W : 1.5 Lux @ F3.5
Camera with Cables
Color: 2.4 Lux @ F1.6
Color : 2.8 Lux @ F3.5
B/W: 0.5 Lux @ F1.6
B/W : 0.9 Lux @ F3.5
True Day / Night (IR Cut Filter)
1080p (2 MP)
5 ~ 25 mm (5x zoom)
4 mm (86° FoV)
(49.2° ~ 105.2° FoV)
F 2.0 Fixed
F3.5 ~ F3.7
1.0Vpp 75Ω BNC Unbalanced
Torx Wrench
Auto, Manual, Preset
2000K ~ 11000K
Yes
Yes
14°F (-10°C) ~ 122°F (50°C)
8.2W Max
9W Max
0.68A
0.75A
Power over Ethernet / 12vDC
0.97 lb (439 g)
1.1 lb (499 g)
Mount Plate
(H x W) 3.27" x 4.92" (83mm x 125mm)
White / Clear
Template Sheet for
Installing by Bolt
& Nut

3. Product Overview

Mount Bolt & Nut
- 2 pcs
Screw & Plastic
Anchor - 3 pcs
B
Manual CD &
Documents
A - Dome Cover
B - 12vDC Cable
C - Ethernet Cable
D - Mount Plate
Template Sheet for
Installing by Plate

4. Before Installation

A
C
The camera is shipped with protective foam and plastic
covering to ensure product safety. Before installation, all
protective foam and plastic must be removed. The camera
D
dome cover must be removed to access all protective
packaging.
Note: When mounting the camera, it must be installed onto
a horizontal surface, ideally the ceiling. If you wish to mount
the camera to a vertical surface, such as the wall, you will
need to install a wall mount.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OE-C7022-FPW and is the answer not in the manual?

Questions and answers

Summary of Contents for OpenEye OE-C7022-FPW

  • Page 1 Sony 1/2.8” CMOS Quick Start Guide IP Rating IP66 (Outdoor) Wide Dynamic Range True WDR OE-C7022-FPW model no: Minimum Illumination @ 50 IRE Color: 4.0 Lux @ F1.6 Color : 4.6 Lux @ F3.5 OE-C7022-APW B/W: 0.8 Lux @ F1.6 B/W : 1.5 Lux @ F3.5...
  • Page 2 Seal mounting bolts to ensure water resistance. a 16GB microSD card. To access the camera setup menu, you need to install the OpenEye network, all cameras will have the default IP address 192.168.0.250. Network Camera Manager on your PC or recorder. To install the Screw the nuts onto the bolts and secure tightly.

This manual is also suitable for:

Oe-c7022-apw

Table of Contents