Advertisement
Quick Links
CONNECTIONS
2
1
123
Network
1
-
RJ-45 connector w/ LED for PoE connections
(with PoE)
1
24vAC 1
Power
2
(3-pin Terminal
2
GND
Block)
3
24vAC 2
1
ALM_DI -
2
ALM_DI +
3
Alarm I/O
3
ALM_DO -
4
ALM_DO +
Line in /
Pink
Mic in
4
Audio I/O
Green Line out
5
BNC
-
Analog video out
23221 E Knox Ave
Liberty Lake, WA 99019
509.232.5261
ww.openeye.net
3
4
5
Pink
Green
1234
12vDC (-)
Power connection
Reserved
12vDC (+)
Alarm connection
Two-way audio
transmission
Copyright ©2015 OpenEye.
All Rights Reserved. Information contained in this document is
subject to change without prior notice. OpenEye does its best to
provide accurate information but cannot be held responsible for
typos or mistakes.
QUICK START GUIDE
OE-C7224-AWR | 4MP IR IP Bullet Camera
This quick start guide is a reference for users to install and operate your
OpenEye camera and only provides basic information on the camera's settings
and operation. Before attempting to connect, configure and operate your
OpenEye camera, please read the user manual thoroughly.
33436AA
www.openeye.net
Advertisement
Related Manuals for OpenEye OE-C7224-AWR
Summary of Contents for OpenEye OE-C7224-AWR
- Page 1 OE-C7224-AWR | 4MP IR IP Bullet Camera This quick start guide is a reference for users to install and operate your OpenEye camera and only provides basic information on the camera’s settings and operation. Before attempting to connect, configure and operate your OpenEye camera, please read the user manual thoroughly.
- Page 2 12vDC power, verify the 192.168.0.250 after four minutes. To Operating w/o Heater: -40°C ~ 50°C polarity of the power connection. If you modify the IP address, use the OpenEye Temperature (-40° ~ 122°F) are using PoE, make sure the Power Network Camera Manager.
Need help?
Do you have a question about the OE-C7224-AWR and is the answer not in the manual?
Questions and answers