2
Network Interface
The VMSE supports 10 Mbit Ethernet through its RJ45 (10BaseT) connector.
Hardware Address (MAC Address)
The first three bytes are fixed, and read 00-20-4A. The fourth, fifth, and sixth
bytes are unique for each VMSE and are used to generate the serial number.
The address is in Hex notation.
Power Requirements
The VMSE is not shipped with a power supply. The required input voltage can
vary between 9VDC and 30VDC with a maximum of 3 Watts. The VMSE can
be powered from the 24 Volt supply on the VersaMax, Series 90-30, or an
external supply can be used. Take care not to exceed the capacity of the
VersaMax or Series 90-30 power supply.
2-2
VersaMax Serial to Ethernet Adapter User Manual
GFK-1852B