Table of Contents
Advertisement
G. After the Enter button is pressed in the previous step, the Telnet window
opens with the VMSE Serial number, shown in the next figure. Confirm the
Telnet connection by pressing the Enter key within 3 seconds. It you don't
respond by pressing the Enter key within 3 seconds, the telnet connection will
time out and you will have to close the telnet window and repeat the previous
step.
Figure 1-6. The Telnet Response Window
GFK-1852B
Chapter 1 Introduction and Quick Start
Introduction and Quick Start
1
1-7
- Quick Links:
- Quick Start
- Default Ip Address
- Serial Interface
Hide quick links:
Advertisement
Table of Contents
