4
Unix
Unix arp details when the hardware address of the VMSE is 00-20-4A-01-
64-0B.
The command example for most Unix systems is:
arp -s 191.12.3.77 00:20:4A:01:64:0B
Configuration Parameters
After configuration mode is entered (confirm with <ENTER>), the
parameters can be changed; default values can be confirmed with the
ENTER key. The parameters must be saved , and the VMSE performs a
power reset.
The Configuration for each of the firmware loads of the VMSE is slightly
different. If you need to load a different firmware than is in the VMSE, load
the firmware first, and then follow the directions for configuration for the
appropriate firmware. The next sections contain the details for configuration
setup for each of the firmware loads.
4-4
VersaMax Serial to Ethernet Adapter User Manual
GFK-1852B