Buffer Flushing
With this parameter it is possible to control line handling and network
buffers with connection startup and disconnect. Also, selection between two
different packing algorithms is possible.
Clear input buffer (line to network)
With active connection
With passive connection
At time of disconnect
Clear output buffer (network to line)
With active connection
With passive connection
At time of disconnect
Alternate packing algorithm1
Figure 4-5. Buffer Flushing Options
Inactivity Timeout
With this parameter an inactivity time can be set. If the set time expires
without an activity on the serial line, the connection is dropped.
GFK-1852B
Chapter 4 Configuration
Function
Configuration
7
6
5
4
3
1
1
1
1
4
2
1
0
1
1
1
4-17