Njoy Alvis Series User Manual page 8

5 Instalation and Initial Startup
Step 1. Inspection
Remove the unit from the shipping package and inspect it for
damage that might have occurred during transportation.
Notify the carrier and place of purchase if any damage is
found.
Step 2. Placement & Storage Conditions
Install the unit in a protected area that is free of excessive
dust and has adequate air flow. Please place the unit away
from other units at least 20cm to avoid interference. Do
NOT block the top or side air vents on the unit. Do not use
the unit in an environment where the ambient temperature
or humidity is outside the limits listed in the specifications.
Operate the unit in an environment free of excessive dust,
mechanical vibration, inflammable gases and explosive or
corrosive atmospheres.
INPUT
OUTPUT
08