Advertisement
Available languages
Available languages
Note: A small spacer and washer are used to locate the
nozzle tip within the guard. Be careful not to lose these
components when the nozzle guard is removed.
3.
Loosen the nut below the handle using a 19mm
spanner. Slide the tab out of its groove to free the
trigger guard.
Tip: Using a shifter or bench vice to hold the upper part
of the spray gun will make this step much easier.
4.
Remove the mesh filter from the handle and clean
all components in the cleaning solution.
Note: If nozzle tip is blocked, use provided needle by
inserting into the nozzle tip.
5.
To clean the mesh filter, remove the cap at the end
of the filter and then pull the mesh
section out to disassemble the filter. Use the provided
brush to scrub the inside of the
mesh filter.
Note: After cleaning, inspect the condition of the filter. If
the mesh is clogged with dried paint, has started fraying
or has deformed out of shape it will need to be replaced.
6. Follow this procedure in reverse to re-assemble the
spray gun.
Once you have completed the cleaning procedure, it is
important to protect
the internal components of the pump before it is stored
away. Failure to do
so may result in premature wear and corrosion of the
pump and various other components in your Airless Paint
Sprayer.
Refer to the manufacturer's instructions for use and
follow accordingly.
cleaned before storing to prevent build up of dried paint
which can cause blockages and stop the unit from
working.
Coil the high pressure hose after cleaning and for storage
to prevent damage to the hose.
Caution:
Be sure to follow the pressure release procedure
when shutting the airless sprayer down for any purpose,
including cleaning or adjusting.
• Keep the vents of the spray gun clean at all times. If
possible, prevent
foreign matter from entering the vents.
• If the body of the spray gun requires cleaning, do not
use solvents but a
moist soft cloth only. Never let any liquid get inside the
gun body; never immerse any part of the spray gun into a
liquid.
27
EN | ENGLISH
STORAGE
MAINTENANCE
Advertisement
