Advertisement
Available languages
Available languages
KNOW YOUR PRODUCT
AIRLESS SPRAY GUN
1.
On/Off Switch
2.
Pressure Control Dial
3.
Stand
4.
Filter
5.
Paint Outlet
6.
Inlet Return Pipe
7.
Inlet Hose
8.
Priming Lever
9.
Carry Handle
10.
Nozzle Tip
11.
Spray Gun
12.
High Pressure Hose
13.
Hex Key
14.
Fine Needle
15.
Cleaning Brush
ASSEMBLY & SET-UP
WARNING! ENSURE THE TOOL IS DISCONNECTED FROM
THE POWER
SUPPLY
BEFORE
PERFORMING
FOLLOWING OPERATIONS.
Frame Connection
1.
Insert the paint station into the frame, aligning the
4 bolt holes (2 either side).
2.
Insert the 4 bolts with washer and spring washer.
Tighten the bolts using the included hex key.
ANY
OF
THE
21
Hose Connection
1.
Connect the high pressure hose to the paint outlet
and tighten clockwise.
Note: The air caps on the paint station and air hose
will need to be removed prior to connection.
2.
Connect the other end of hose to the gun inlet and
tighten clockwise.
3.
Ensure all connections have been correctly
tightened with a 19mm spanner on the hose, and a
17mm spanner to hold the connection.
4.
Connect the inlet hose and return pipe to the paint
station. Secure the return pipe by releasing the
tabs on the hose clamp.
EN | ENGLISH
Advertisement
