EGO Power+ CH7000E Original Instructions Manual page 6

◾
Do not operate the charger if it has received a
EN
sharp blow, been dropped, or has otherwise
been damaged in any way. Take it to an authorized
service technician for an electrical check to determine
if the charger is in good working order.
◾
Do not disassemble the charger. Take it to an
authorized service technician when service or repair is
required. Incorrect reassembly may result in a risk of
electric shock or fire.
◾
Unplug the charger from the electrical outlet
before attempting any maintenance or cleaning
to reduce the risk of electric shock.
◾
Disconnect charger from the power supply when
not in use. This will reduce the risk of electric shock
or damage to the charger if metal items should fall into
the opening. It will also help prevent damage to the
charger during a power surge.
◾
Risk of electric shock. Do not touch the uninsulated
portion of output connector or uninsulated battery
terminal.
◾
Save these instructions. Refer to them frequently
and use them to instruct others who may use this tool.
If you lend this tool to someone else, also lend these
instructions to them to prevent misuse of the product
and possible injury.
IMPORTANT SAFERTY INSTRUCTIONS
◾
Save these instructions. This manual contains
important safety and operating instructions for this
charger.
◾
Before using the battery charger, read all
instructions and cautionary markings on the
battery charger, the battery and the product
using the battery.
WARNING:
When using electric appliances, basic
precautions should always be followed, including the
following.
◾
To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
◾
Only use attachments recommended or sold by
manufacturer.
◾
Do not use outdoors.
◾
For a portable appliance – To reduce the risk of
electrical shock, do not put charger in water or other
liquid. Do not place or store appliance where it can fall
or be pulled into a tub or sink.
CAUTION:
To reduce the risk of injury, charge
only lithium-ion rechargeable batteries. Other types of
batteries may burst, causing personal injury or damage.
6
700W RAPID+ CHARGER — CH7000E
SPECIFICATIONS
Charger Input 220-240 V~50 Hz, 700 W
Charger
10A, 56V
Output
Approx. 25-30 mins for 4.0 Ah battery pack
Approx. 30 mins for 2.5/5.0 Ah battery pack
Charging Approx. 35 mins for 6.0 Ah battery pack
Time Approx. 45 mins for 7.5 Ah battery pack
Approx. 60 mins for 10.0 Ah battery pack
Approx. 75 mins for 12.0 Ah battery pack
Optimum
Charging 5°C-40°C
Temperature
Charger
2.0 kg
Weight
DESCRIPTION
KNOW YOUR BLOWER (Fig. A)
1. Battery Mounting Slot
2. Cooling Air Openings
3. LED Indicators
4. Electrical Contacts
5. Handle
6. Wall Mounting Hole
OPERATION
HOW TO CHARGE THE BATTERY PACK
WARNING:
Do not use the charger outdoors or
expose it to wet or damp conditions. Water entering the
charger will increase the risk of electric shock.
NOTICE: Lithium-ion battery packs are partially charged
before shipping. Before using it for the first time, fully
charge the battery pack.
Fig. B parts description see below:
B-1 Green LED
B-2 Red and Green bicolour LED
1. Connect the charger to the power supply
(220-240V ~ 50Hz). The 5 charging indication LEDs
will briefly shine green and turn out, indicating that
the charger is working properly.
2. Align the raised ribs of the battery pack with the
battery mounting slots in the charger; slide the
battery pack down onto the charger, as shown in
Fig. C.
3. The charger will communicate with the battery pack
to evaluate the condition of the battery pack.