Ford SUPER DUTY 2023 Owner's Manual page 432

Note: If completed successfully, the
information display shows Neutral Tow
Enabled Leave Transmission in Neutral.
This indicates that your vehicle is safe to
tow with all wheels on the ground.
Note: If you do not see a confirmation
message in the instrument cluster display,
you must perform the procedure again from
the beginning.
Note: You may hear noise as the transfer
case shifts into its neutral position. This is
normal.
8. Release the brake pedal and leave the
transmission in neutral (N) and switch
your vehicle off by pressing the push
button ignition switch once without
pressing the brake pedal or turning the
key as far toward the off position.
Note: Vehicles with keys do not turn to the
off position when the transmission is in
neutral (N). You must leave the key in the
ignition when towing. Use the keyless entry
keypad or an extra set of keys to lock and
unlock your vehicle.
Switching Neutral Tow Off
1. With your vehicle properly secured to
the tow vehicle, place your vehicle in
accessory mode by pressing the push
button ignition switch once without
pressing the brake pedal or by turning
the ignition key to the on position.
2. Press and hold the brake pedal.
3. Shift the transmission to Park (P) and
continue holding the brake pedal until
the instrument cluster display shows
2H and Neutral Tow Disabled.
4. Release the brake pedal.
Note: If completed successfully, the
instrument cluster displays 2H and Neutral
Tow Disabled.
2023 Super Duty (TFH) Canada/United States of America, enUSA, Edition date: 202211, DOM
Towing Your Vehicle
Note: You must perform the switching
neutral tow on and switching neutral tow
off procedures again from the beginning if
the indicator light and message do not
display.
Note: You may hear a noise as the transfer
case shifts out of its neutral position. This
is normal.
5. Apply the parking brake, then
6. Release the parking brake, start the
7.
Resolving the Shift Delayed Pull
Forward Message
1.
2. Start your vehicle.
3. Shift into neutral (N).
4. With the vehicle running, shift into drive
Note: You may hear a noise as the transfer
case shifts out of its neutral position. This
is normal.
5. Make sure the instrument cluster
428
disconnect your vehicle from the tow
vehicle.
engine, and shift into drive (D) to make
sure the transfer case is out of the
neutral tow position.
If the transfer case does not
successfully shift out of its neutral
position, set the parking brake. Have
your vehicle checked as soon as
possible.
Press and hold the brake pedal.
(D) and let the vehicle roll forward up
to 3 ft (1 m).
displays Neutral Tow Disabled.