Automatic High Beam Control - Ford SUPER DUTY 2023 Owner's Manual

EXTERIOR ZONE LIGHTING
SETTINGS
1. Press Features on the touchscreen.
2. Press Zone Lighting.
3. Press the settings menu in the upper
right-hand corner.
4. Press a setting.
Enable Autolamp Override
This setting allows your vehicle to override
the autolamps when using zone lighting.
When you access zone lighting for the first
time, you can choose this setting. You can
change this setting at any time.
Include Reverse Lamps
This setting turns the reverse lamps on
when you switch the rear lighting zone on.
Switch this setting off if you have a backup
alarm installed to prevent the reverse
lamps from turning on and sounding the
alarm when using zone lighting.
AUTOMATIC HIGH BEAM
CONTROL
(IF EQUIPPED)
HOW DOES AUTOMATIC HIGH
BEAM CONTROL WORK
Automatic high beam control turns the
high beams on if it is dark enough and no
other traffic is present. If it detects an
approaching vehicle's headlamps or tail
lamps, or street lighting ahead, the system
turns the high beams off.
A camera sensor, centrally mounted
behind the windshield of your vehicle,
continuously monitors conditions to turn
the high beams on and off.
2023 Super Duty (TFH) Canada/United States of America, enUSA, Edition date: 202211, DOM
Exterior Lighting
E327596
AUTOMATIC HIGH BEAM
CONTROL PRECAUTIONS
relieve you of your responsibility to drive
with due care and attention. You may
need to override the system if it does not
turn the high beams on or off.
122
A Without automatic high beam
control.
B With automatic high beam
control.
WARNING: The system does not