Seneca ZE-4DI-2AI-2DO Installation Manual

ZE-4DI-2AI-2DO / ZE-4DI-2AI-2DO-P
PRELIMINARY WARNINGS
The word WARNING preceded by the symbol
risk. The word ATTENTION preceded by the symbol
instrument or connected equipment.
The warranty shall become null and void in the event of improper use or tampering with the module or devices
supplied by the manufacturer as necessary for its correct operation, and if the instructions contained in this
manual are not followed.
WARNING: The full content of this manual must be read before any operation.
The module must only be used by qualified electricians.
Specific documentation is available using the QR-CODE shown on page 1.
The module must be repaired and damaged parts replaced by the Manufacturer.
The product is sensitive to electrostatic discharges. Take appropriate measures during any operation.
Electrical and electronic waste disposal (applicable in the European Union and other countries with recycling).
The symbol on the product or its packaging shows the product must be surrendered to a collection centre authorized to recycle
electrical and electronic waste.
DOCUMENTATION
ZE-4DI-2AI-2DO
SENECA s.r.l.; Via Austria, 26 – 35127 – PADOVA – ITALY; Tel. +39.049.8705359 - Fax +39.049.8706287
CONTACT INFORMATION
Technical support
This document is the property of SENECA srl. Copies and reproduction are prohibited unless authorised.
The content of this document corresponds to the described products and technologies.
MI00582-2-EN
INSTALLATION MANUAL
Z-4DI-2AI-2DO
ZE-2AI / ZE-2AI-P
DOCUMENTATION
ZE-4DI-2AI-2DO-P
supporto@seneca.it
Stated data may be modified or supplemented for technical and/or sales purposes.
indicates conditions or actions that put the user's safety at
indicates conditions or actions that could damage the
DOCUMENTATION
Z-4DI-2AI-2DO
Product information
INSTALLATION MANUAL
DOCUMENTATION DOCUMENTATION
ZE-2AI-P
commerciale@seneca.it
ZE-2AI
1/6