Table of Contents
Advertisement
Step 2. Remove the screw holding the ice checking pole with a cross screwdriver (+).
Step 3. Pull out in the direction of arrow A, and push down in the direction of arrow B; then
take the electronic motor out.
Step 4. Remove the white line from buckle in the direction of arrow.
Step 5. Push out in the direction of arrow C, and pull up in the direction of arrow D; then
take the combine part out.
Step 6. Remove the white line from buckle of ice tray in the direction of arrow.
Step 7. Peel off the aluminum foil then take the temperature head out.
Step 8. Take the insulation foam out.
Step 9. All parts of the ice maker part show in picture 9.
51 / 56
Advertisement
Table of Contents
