Table of Contents
Advertisement
14
1. Pull out the freezer door and the upper
freezer drawer (A) to the final position.
Then take out the ice box (B) by lifting it up
in the direction of the arrow.
2. Take out the upper freezer drawer (A)
by lifting it up from the rail system.
3. Remove the lower freezer drawer (C) by
lifting it up.
4. Remove the 4 screws attached to the
supporting frame (D).
5. Pull out the freezer door and lift it up in
the direction of the arrow.
Re-assembling the freezer door
To reattach the drawer after you moved
the
appliance
to
assemble the parts in reverse order.
Warning!
Switch off the appliance and disconnect
it from the main power before removin
g or re-assembling the door.
3. Installing the water lines
A water dispenser with a filter is one of the
helpful features on your new appliance. To
help promote better health, the water filter
removes unwanted particles from your
water. However, it does not sterilize or
destroy microorganisms. You may need to
purchase a water purifying system to do
that.
In order for the ice maker to operate
properly, a water line is required.
-the maximum inlet water pressure is
896kPa;
-the minimum inlet water pressure is
207kPa.
Warning:
The water connection must be made by a
qualified plumber. Operation outside the
water
pressure
range
malfunction, severe and damaging water
leaks.
Under normal conditions, a200cc (5.75 oz.)
cup can be filled in about 10 seconds.
its
final
location,
may
cause
Advertisement
Table of Contents
