Using Your Appliance - Hisense BCD-543WPAZR/HC1(E) Service Manual

Table of Contents

Advertisement

previous setting.
Alarm
When fridge or freezer door has been
opened for over 2 minutes, door alarm will
sound. In case of door alarm, buzzer will
sound 3 times every 1 minute and will stop
alarming automatically after 8 minutes.

4.2 Using your Appliance

This section tells you how to use most of the useful features. We recommend that you
read through them carefully before using the appliance. It may be different depending on
the model
For proper installation, this refrigerator
must be placed on a level surface of hard
material that is the same height as the rest
of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
energy, it is necessary to maintain good
ventilation around the appliance for the
dissipation of heat. For this reason,
sufficient clear space should be available
around the refrigerator.
1. Leveling of appliance
For sufficient leveling and air circulating
in the lower rear section of the appliance,
the bottom feet may need to be adjusted.
You can adjust them manually by hand or
by using a suitable tool.
To allow the doors to self-close, tilt the
top backwards by 10~15mm.
Caution!
Let your refrigerator stand upright for
approximately 4 hours before connecting it
to power. This reduces the possibility of a
malfunction in the cooling system from
improper handling during transportation.
Wait for approximately 2 hours after
To save energy, please avoid keeping the
door open for a long time when using the
appliance. The door alarm can also be
cleared by closing the door.
moving your appliance or plugging it in for
the first time so that the coolant fluid
settles.
If you do not level your refrigerator during
installation, the doors may not close or
seal correctly which can cause cooling,
frost, or moisture problems.
12 / 56

Advertisement

Table of Contents
loading

Table of Contents