Table of Contents
Advertisement
Page - 47
From the Transmission Plan menu select < 2 > to select the Carrier Freq menu.
Press < 7 >, < 1 >, < 1 > to set the IF frequency to 71.1 MHz. Press <ENTER> to initiate the
change.
Press the <MENU> key to return to the main Set Up Menu.
Saving the example setup as a stored configuration
To save this configuration for easy future recall press < 1 > to enter the System Config Menu.
From the System Config menu press < 2 > to enter the Save System Config menu.
From the Save System Config menu press < 1 > to store the setup in memory location 1. Press
<ENTER> to initiate the change.
Starting the system with the example configuration.
Press the MENU key to return to the main Set Up Menu.
From the Set Up Menu press < 2 > to enter the System Start/Stop menu. Press Enter to start
the system. It can take up to 10 seconds for the system to start.
Page 47 of 51
DVT2000-001
Advertisement
Table of Contents
