Function Keypad; Rear Panel Connectors; Main Keypad - Wegener DVT2000 Instruction Manual

Page - 16

2.2.2 Function Keypad

The Function keypad selects the operation desired. There are four selections: Menu, Lock, Reset
and Rem(ote). These are defined in Table 3.

2.3 REAR PANEL CONNECTORS

All connections to the transmitter are made to the rear panel. The connectors and ports are
described in Table 4.
TABLE 2. MAIN KEYPAD
KEY DEFINITION
0-9 0-9
DEL Deletes entry
ENT Enter
↑
Up
↓
Down
←
Left
→
Right
TABLE 3. FUNCTION KEYPAD
KEY DEFINITION
Menu Selects Menu flows for
transmitter and network
control
Lock Locks the front panel
control
Reset Reboots the system
Rem Not used. Use rear control
toggle switch "down" for
remote control.
Page 16 of 51 DVT2000-001