Table of Contents
Advertisement
Front Panel Operations
Press <RESET> to reboot the unit.
From the Set Up Menu press < 1 > to select the System Config menu.
From the System Config menu press < 3 > to select the View/Modify Params menu.
From the View/Modify Params menu press < 2 > to select the Video Parameters menu.
From the Video Parameters menu press < 3 > to select the Format menu.
From the Format menu press either the left or right arrow to toggle from NTSC to PAL.
Press <RESET> to reboot the unit and load the PAL software.
From the Set Up Menu press < 1 > to select the System Config menu.
From the System Config menu press < 3 > to select the View/Modify Params menu.
From the View/Modify Params menu press < 2 > to select the Video Parameters menu.
From the Video Parameters menu press < 1 > to select the Resolution menu.
From the Resolution menu press either the left or right arrow to select the 704x 576 parameter.
Press <ENTER> to accept the change.
Press the up arrow key to return to the Video Parameters menu
Parameters
Video Standard
Input Video Format
Number of Audio Channels
Video Resolution
IF Output Frequency
FEC
Information Rate
Audio Data Rate
ASYNC AUX Data Rate
Page 45 of 51
PAL
Serial D1
2
704 x 576
71.1 MHz
3/4
8.448 Mbps
192 kbps
19.2 kbps
Page - 45
DVT2000-001
Advertisement
Table of Contents
