Wegener DVT2000 Instruction Manual page 37

The IBP setting has two options: "M" = 03 <inter P Dist>; N = 15 <inter I Dist>. N is a multiple
value of M. IBP is recommended when the highest compression is used to limit artifacts.
Predictive (IP) is easier to edit with the same video quality at higher data rates. Digital editing
requires I frames only and the highest data rates.
5.4.2.3 Selecting Video Standard
To select the standard video format to be output, select "3."
The STANDARD menu displays.
The options are NTSC and PAL. Use the arrow keys to select the desired format.
When you have selected the desired format, press ENTER
on the FUNCTION keypad.
5.4.2.4 Selecting Format
To select the video format to be output, select "4." Composite or Serial D1
The FORMAT menu displays.
Format
NTSC
[ENT>Accept Data]
Format
.
Composite
[ENT>Accept Data]
Page 37 of 51
You must press
<RESET> immediately
after you change from
NTSC to PAL or back.
;
then immediately press <RESET>
The options are
Composite or D1
Page - 37
DVT2000-001