Table of Contents
Advertisement
QUADMO747-E6xx
Page 27
User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2- Author: S.B. - Reviewed by G.M.
4.4.8 SATA Ports Enabled
This option allows separated enabling of Sata ports. It is possible to enable only SATA port #0,
only SATA Port #1 or both.
Please consider that SATA port#0 is the interface always carried out of Quadmo747-E6xx module,
through the golden edge finger, while SATA port#1 can be carried out or used internally for the
embedded Flash Disk.
4.4.9 PCI Express Slot 1 / 2 / 3 (Int. Lan)
This option allows you to enable or disable single slots of PCI Express Bus. Auto option will allow
automatic enabling of PCI Express slots in case PCI-e peripherals are found.
Please consider that on PCI Express Slot 3 is placed the internal Gigabit Ethernet Controller.
Therefore, disabling PCI Express Slot 3 will result in disabling the Gigabit Ethernet Interface.
4.4.10 INTA IRQ
This option allows choosing which IRQ has to be assigned to PCI INTA# line (possibilities are IRQ
3, 4, 5, 6, 7, 10, 11, 12, 14, 15 or NO). Please refer to par. 4.6.3 for Quadmo747-E6xx board's
internal devices INTx# assignment.
4.4.11 INTB IRQ
This option allows choosing which IRQ has to be assigned to PCI INTA# line (possibilities are IRQ
3, 4, 5, 6, 7, 10, 11, 12, 14, 15 or NO). Please refer to par. 4.6.3 for Quadmo747-E6xx board's
internal devices INTx# assignment.
4.4.12 INTC IRQ
This option allows choosing which IRQ has to be assigned to PCI INTA# line (possibilities are IRQ
3, 4, 5, 6, 7, 10, 11, 12, 14, 15 or NO). Please refer to par. 4.6.3 for Quadmo747-E6xx board's
internal devices INTx# assignment.
4.4.13 INTD IRQ
This option allows choosing which IRQ has to be assigned to PCI INTA# line (possibilities are IRQ
3, 4, 5, 6, 7, 10, 11, 12, 14, 15 or NO). Please refer to par. 4.6.3 for Quadmo747-E6xx board's
internal devices INTx# assignment.
Copyright © 2012 SECO s.r.l.
QUADMO747-E6xx
Advertisement
Table of Contents
