Accepting An Incoming Call; Rejecting An Incoming Call; Unsuccessful Calls; Emergency Calls - NEC N401i User Manual

and stored in your phonebook with a name and a CLI picture (see page 53), that name and picture will be displayed. If the caller has withheld their identity,
the screen will give a message that the caller's number is being withheld.
You also have options for holding and forwarding calls. These options depend on your network and your subscription arrangements.

Accepting an incoming call

☛
While receiving an incoming call, press
When you use the headset, you can also accept an incoming call by pressing the button on it.

Rejecting an incoming call

☛
While receiving an incoming call, press
When you use the headset, you can also reject an incoming call by pressing and holding the button on it.
You cannot reject a call by closing your phone when the headset is connected.
If your phone receives a call and you do not answer it, the screen will display the phone number (or the name if stored) of the caller (if available). This
information is stored in the missed calls list. Up to 20 missed calls are stored in this list.
You can set your phone to answer a call when any key is pressed (see "Any key answer" on page 21).
If you are making a call, the phone gives priority to receiving a call unless you have already pressed
See also: "Call diversion (M161)" on page 11 and "Call waiting and holding (M162)" on page 12.
See also: "Call options (M43)" on page 9.

Unsuccessful calls

If dialled call is not successfully connected, the display will give an appropriate message.
If your phone has the auto redial function activated, the number will be automatically called again after a short delay (see page 12).

Emergency calls

The standard emergency number of 112 can be used.
☛
Key in 1 1 2 ➔ or SK1 to connect the call to the local emergency services.
On some networks, emergency calls can be made using the 112 number without a SIM card inserted.

Last number redial

You can redial the last number you called.
☛
Ensure that the standby screen is displayed and no phone number is shown
6
or SK1.
or SK2 briefly or close your phone.
.
➔ twice to dial the last number you called.