Switching The Phone On; Attaching And Removing The Emblem; Switching The Phone Off; Pin Code - NEC N401i User Manual

Attaching and Removing the Emblem

Attaching the emblem
Attach the emblem, aligning the holes to
fit the 2nd-LCD, LED and camera.

Start-up

Switching the phone on

☛
Hold down for about a second to switch on. The screen will display the selected greeting (see page 23) and the phone is then in standby.
You may need to charge the battery before using your phone.
When your phone is turned on, the specified ringer may sound.
If your phone is accidentally turned off while downloading or deleting Java™ application, it will take longer than usual to start up the phone the next
time you turn on the power.

Switching the phone off

☛
Hold down until the display shows the switch off message.

PIN code

The SIM card issued by your service provider has a security feature called PIN code protection. The Personal Identification Number (PIN) is a number
put on to the card by your service provider, and is 4 to 8 digits long. Some service providers supply SIM cards which will cause your phone to prompt for
4
Depressions
Depressions
Make sure the emblem is fitted over
the square depressions on each side
of the phone.
Removing the emblem
Depressions
Depressions
Remove the emblem by hooking your finger tips near the
square depressions and lifting in the direction of the
arrows. You can also remove the emblem from the other
side of the phone.