Infrared (M) - NEC N401i User Manual

If you have made a mistake in entering the amount, CLR to delete individual number or SK2 to cancel the entry and return to the previous screen,
and then start again.
Resetting the currencies
☛
8 8 and SK1
Infrared (M89)
Infrared function enables you to receive data (phonebook/picture/video/sound excluding MP3/schedule/ToDo list/note data) from other devices, or a
cellphone of the same model via the infrared port. This function also enables you to use your phone as a modem for your PC via the infrared port to
establish a dial-up connection to an Internet service provider
This function is not available during a call.
For details, see "IR Data Exchange" on page 17.
☛
8 9
No. Infrared setting
1 IR receive
2 IR modem
Your phone consumes a lot of battery power when used as a modem. After using your phone as a modem, be sure to deactivate the modem
function from your PC or press
without the Infrared icon and GPRS icon.
76
Receives data via infrared.
☛
After the data has been received, SK1 to save the received data.
Uses your phone as a modem for your PC via infrared.
After the IR connection is established, the idle screen with an Infrared icon and a General Packet Radio
Service (GPRS) icon will be displayed for GPRS connection, and the Circuit Switched Data (CSD) connection
screen will be displayed for CSD connection.
(for the CSD connection only). When the modem function is deactivated, the idle screen will be displayed