Table of Contents
Advertisement
4.5.9
Minute tone
Set up the open or close of minute prompt. If the function is started, there will be minute prompt in the
process of call. If closed, then there is no minute prompt at all.
4.5.10 Incoming call filtering
Incoming call filtering is a kind of feature easy and handy, which protect you from being interrupted by
unwanted calls. You can utilize this feature under various circumstances. It includes "Black list"and "White
list" in which the phone calls (Max: 30) you want to auto-reject are saved in"Black list", and those with
permission (Max 30) are save in "White list", any other ones that are excluded will be rejected utterly.
Note：System only compares the last eleven digits to those in Black/White list to perform filtering or
not.
Status
Enter Status, select filter type, and then press OKor Select to confirm. Before you enable the filter, you
have to set up the name list.
Black list
Enter Incoming call filtering, select "Black list", press
To enter name list. If no filtered names added in, it will display blank. Activate Option Select New
to add unwanted number; Select Delete to delete highlighted number; Select Delete all to delete all
items.
White list
Operations on White list are the same as that on Black list.
4.5.11 Phone number display
Choose to display call originator's number on the receiver's device.
Note：This service needs network support。
4.5.12 IP Code
Setting up IP code: input the IP code to use. If not setting up, it is same as the effect of directly dialing up.
4.6 Security
The setup of safety includes the following contents such as Phone Lock, Bare call ,SIM password, PIM
safety, Security mode, Modify password.
4.6.1
Phone Lock
This function is for Phone Lock , If you want to use the phone ,you must input the right
password (The default password before leaving the factory is 1234 ),you can change the password
in Setting—Security—Modify password.
On :Input the right password ,you can lock the phone;
Off:No phone lock function,disable the phone lock you must input the right password .
You can long press the * to enter Phone lock at idle .
4.6.2
Bar calls
network operator will offer the password (1234) for start the Bar calls . If it is forbid, the system will
prompt "Call barring failed!"
Incoming calls :
User Manual for NEC N5105
Selector OK
第 页 35
Advertisement
Table of Contents
