Table of Contents
Advertisement
注意事项
1
,
2
3
4
5.
6. 对于交流龙头，安装时务必按照说明书的要
求正确连接导线，龙头安装完毕后才可向电源盒
供电。
7. 一个交流电源盒最多可供一个感应龙头。
8. 修理面盆时，用黑色电工胶布粘住感应窗口。
9. 维修交流龙头时，必须断开交流电源并关闭
水源。
使用说明
如果使用非推荐的脸盆，可能会产
生溅水在脸盆外面等情况。
2
Notes:
1.
Flush the water supply pipes thoroughly to remove debris.
Faucet is designed for tap water or potable water.
2.
Do not strike the faucet with rough strength to avoid being
damaged and failure.
3. Do not damage the surface of sensing window when
installing or cleaning the faucet.
4. For new installations, install the faucet and drain to
the lavatory before installing the lavatory.
5. As for DC type faucets, please pay special attention to the
battery poles direction. Tighten the battery cover completel y to
prevent its exposure to moisture.
6. As for AC type faucets, strictly follow indicated instructions
to perform electric connection. Only provide electric supply
to power box after the installation is completed.
7. One AC/DC transformer for max.one faucets.
8. Cover the sensing window with black tape when repairing
lavatories.
9. Turn off the electrical source and shut down water supply
before the faucets repaired.
OPERATION INSTRUCTIONS
Place your hands under the faucet within the
sensor range ( the sensor range will auto-adjust
to its surroundings , the faucet should be on.)
The faucet will automatically turn off after 0.5~1
second after moving your hands away from the
sensor. The sensing distance will be adjusted
automatically according to the condition of the
lavatory and surrounding environment.
NOTE: Water spraying out of countertop might happen when
countertop out of the recommended list.
1451063-T01-B
Advertisement
Table of Contents
