Table of Contents
Advertisement
三
控制阀组件的安装固定
拧松
5
6
10
11
12
13
13
(13)
(14)。
1.
2.
四 安装电源盒组件
1.安装交流电源盒组件
Install AC power unit assembly
6
4
10
12
12
12
6
5
12
13
滤网组件
Filter Assy
13
感应龙头
Faucet
3.Fasten control valve assembly
Unscrew valve cover screws (4) by
screwdriver, open valve cover (5).
Determine control box assembly (6)
installation location per rough-in; then
4
drill holes, and punch plastic expansion
tube (10) in. Place valve box against
the wall and then mount control valve
assembly on the wall by expansion
screws (11). Keep control box assembly
parallel to the wall.
11
Connect check valve (12) to outlet, then
connect the hose (13) to check valve
(12). Put a bucket in the front of hose
(13). Keep check valve (12) fully open,
turn on the water supply for about 1 min,
make sure no leakage on pipeline, and
then turn off the water supply.
Then connect check valve (13) to valve
outlet to faucet assembly water outlet
hose (
14).
Note:
1. Customer shall prepare check valve.
14
2. Do not mix water inlet with water outlet.
Install power unit assembly
G1/2
Please prepare external
thread angle valve G1/2
开关
220V交流电Connect
Switch
AC 220V
穿线管
Wire Tube
1451063-T01-B
Advertisement
Table of Contents
