To Set an Alarm
You can set only one time. You can set a recurrent alarm to ring at a specific time on several days of week.
To
1
Set alarm clock to on
2
Set time
3
Set repeat setting
4
Set clock alarm tune
To Edit an Alarm
You can cancel an alarm clock setting, change setting time, etc. To edit your alarm clock setting, press the
SK1 (Edit) key and edit.
Calculator
(press "MENU" key
e808 has a built-in calculator, which can add, subtract, divide and multiply. Use the following keys:
•
Use Right key as + key
•
Use Left key as - key
•
Use Up key as × key
•
Use Down key as / key
•
Use SK1 key as = key
•
Use Enter key to enter a decimal point
•
Use SK2 key as AC key or to clear the figure
Accessories
Do this
Press the SK1 (Edit) key or Enter key, select On and press the
SK1 (Select) key or Enter key.
Set time in 24 hour clock, and press the SK1 (OK) or Enter
key.
Select one of the following cycles and press the SK1 (Select)
key or Enter key: Daily, Weekly or No repeat
Weekly is used to set days of week. Select one or more days
using the SK1 (Select) key.
No repeat indicates the alarm is non-recurrent.
Select the tune you want and press the Enter key. You can
hear the tone by selecting the tone name and pressing the SK1
(Start) key.
→
select "Accessories"
-127-
→
select "Calculator")