NEC e808n Product Manual page 91

To
6 Set the addressee
7 Set the addressee to send a Carbon
Copy
8 Set the addressee to send a Blind
Carbon Copy
Message
Do this
Select To, input the address and press the Enter key (90
characters max. for an addressee). Add more addressees if
necessary. Refer to Sending an email to more than one
addressee on page 86 for details.
Note : A maximum of 10 addresses can be set in To field.
Note : To set the addressee from the Contacts, refer to Setting
the addressee from the contact entries on page 86.
Note : If the email address does not contain an @ symbol, the
email may not be delivered to the destination.
Select Cc, input the address and press the Enter key (90
characters max. for an addressee). Add more addressees if
necessary. Refer to Sending an email to more than one
addressee on page 86 for details.
Note : A maximum of 10 addresses can be set in Cc field.
Note : To set the addressee from the Contacts, refer to Setting
the addressee from the contact entries on page 86.
Select Bcc, input the address and press the Enter key (90
characters max. for an addressee). Add more addressees if
necessary. Refer to Sending an email to more than one
addressee on page 86 for details.
Note : A maximum of 5 addresses can be set in Bcc field.
Note : To set the addressee from the Contacts, refer to Setting
the addressee from the contact entries on page 86.
-81-