General Settings - NEC MultiSync LCD2335WXM User Manual

Operating Instructions
General Setting
Selected
characters
OSD POSITION Use the
OSD TIMEOUT 10SEC--30SEC—1 MIN
OSD LANGUAGE English—Japan—Espanol—Francais
OSD MENU LOCK ON
SLEEP TIMER Use the
INPUT INFO To display information about the input signal.
FACTORY RESET YES
TRANSPARENCY Use the
* Depending on the type of signal displayed, displays may not be optimized through automatic adjustment. Manually adjust to optimize them.
* When operating the TV at first time, its TV system is at "default factory mode" and this mode cannot display the image normally on the screen.In
order to watch the TV program without problem, please refer to the page 25 to setup the TV system accordingly for normally display.
continued
and buttons to adjust the OSD position
OFF
buttons to set the TV off time mode.
NO
buttons to adjust OSD menu transparency
26
OSD POSITION
OSD TIMEOUT
OSD LANGUAGE
OSD MENU LOCK
SLEEP TIMER
I/P INFO
FACTORY RESET
TRANSPARENCY
Setup hint
Adjusts the OSD position
Adjusts OSD display and on-screen time
Sets the language for the OSD.
1. Select "ON" to lock OSD MENU. A message appears
stating that the TV is lock.
2. Press the MENU button and volume increase (on the
keypad) simultaneously. A message appears stating that
the TV is unlocked.
Set the TV off time for each mode (OFF/30MIN/ 60MIN/ 120
MIN)
Displays information about the input signal
Resets all settings to FACTORY defaults.
Adjusts OSD MENU transparency