Other Functions - NEC MultiSync LCD2335WXM User Manual

Operating Instructions

Other Functions

The MTS button is used only when using the TV channel selector.
Stereo and SAP (2nd Audio program) sound program
When a bilingual program is received, the sound mode display appears as shown on the right.
Press the MTS button to select the sound to be heard.
Each time the button is pressed, Stereo, SAP or Mono appears on the screen.
TV
CHANNEL:10 SAP
Mono and SAP (2nd Audio program) sound program
When a program is received, the sound mode display will appear as shown on the right,
and you can press the MTS button to select between SAP and mono sound.
Each time the button is pressed, SAP or Mono will appear on the screen.
Monaural sound
When a monaural program is received, the sound mode display will be shown. You can press the MTS button to manually select monaural Sound.
NOTES
If the sound signal is not strong enough, press the MTS button until Mono appears on the screen, to receive a clear mono sound.
If the sound has a hiss noise or keeps switching between stereo and mono mode or SAP and mono mode due to signal strength, press the MTS button until
Mono appears on the screen to receive a clear mono sound.
Stereo sound
When a stereo program is received, the sound mode display will be shown.
You can press the MTS button to select the sound mode for stereo or mono reception.
Note: Not all menus are available for every input source.
continued
TV
CHANNEL:10 MONO
TV
CHANNEL:10 SAP
22
TV
CHANNEL:10 STEREO
TV
CHANNEL:10 SAP
TV
CHANNEL:10 MONO
PIP:RGB1 VGA
CHANNEL:10 STEREO
MAIN:TV1