Channel Setting - NEC MultiSync LCD2335WXM User Manual

Operating Instructions

Channel Setting

*Note: The TV must be in TV mode for access to this Menu.
When operating the TV at first time, its TV system is at "default factory mode" and this mode cannot display the image normally on the screen. In
order to watch the TV program without problem, please refer to the follow steps to setup the TV system accordingly for normally display
1.SYSTEM setting: Select between antenna or cable (STD / HRC / IRC) TV system
2. Auto Program setting
AUTO PROGRAM:Auto search channels
SELECT: ENTER:
3.FINE TUNE setting
AUTO: Use AUTO function to fine tune screen
MANUAL: Use MANUAL function to fine tune screen
Note: Not all menus are available for every input source.
ANTENNA
CABLE
ANTENNA
CABLE
STD
HRC
IRC
SELECT: ENTER: ADJUST:
ADJUST: RETURN: MENU
continued
SYSTEM
AUTO PROGRAM
FINE TUNE
CHANNEL EDIT
TV 12
RETURN: MENU
SYSTEM
AUTO PROGRAM
FINE TUNE
CHANNEL EDIT
SYSTEM
AUTO PROGRAM
FINE TUNE
CHANNEL EDIT
SYSTEM
AUTO PROGRAM
FINE TUNE
CHANNEL EDIT
15
ANTENNA
CABLE
STD 12
STD
HRC
IRC
HRC 12
STD
HRC
IRC
IRC 12
STD
HRC
IRC
AUTO
MENU
AUTO
MENU