IKEA GRILLSKAR Manual page 6

Do not store or cover the barbecue until fully
cooled.
This product is not suitable for lava rocks.
Do not obstruct the flow of combustion and
ventilation air.
Keep the ventilation opening of the cylinder
enclosure free and clear from debris.
This appliance must be kept away from flammable
materials during use.
Pressure regulator and hose assembly supplied
with this barbecue must be used, propane
regulator which complies to EN16129 and LPG hose
compliant EN16436-1 no longer than 1.5m in
length.
Replacement pressure regulators and hose
assemblies must be the same as those supplied
originally with the barbecue. Never use an
adjustable regulator with this barbecue.
Do not hang any combustible materials from the
hand rails of this barbecue.
Accessible parts may be very hot. Keep young
children away.
Always wear protective gloves or a barbecue mitt
when handling hot components or items such as
pots.
Before each use inspect the gas hose to ensure it is
free of any twisting or tension.
Note: The flexible LPG hose must be replaced prior
to the expiry date as specified by the hose
manufacturer.
LEAK TESTS
IMPORTANT – PERFORM LEAK TESTS BEFORE USE
Always leak test the unit – annually, when dismantled,
when parts are replaced, or if the gas cylinder is
removed or replaced.
• Never use an open flame to check for leaks at
anytime. DO NOT IGNITE THE BARBECUE DURING
LEAK TESTING.
• To be performed in a well-ventilated area.
• Be sure all control knobs are in the 'OFF' position.
• Check for leaks by brushing a solution of 1/2
water and 1/2 soap over all the gas system joints,
including all valve connections, hose connections
and regulator connections.
• Ensure the soap solution has been applied to
all connections – connect the regulator to the
gas cylinder, open the gas control valve on the
regulator allowing gas to flow.
• OBSERVE – if bubbles form over any part of the
joints there is a leak.
• Turn off the gas and tighten all joints
• Repeat test. If bubbles form again, do not use
the barbecue. Please contact your local dealer for
assistance.
GAS AND REGULATOR INSTRUCTIONS
• The cylinder should be positioned underneath the
main barbecue body and stored upright.
6
• Gas cylinders should never be stored or laid on
their side.
User instructions
Before assembling your barbecue, remove all
protective packaging from each part.
The gas cylinder must have a connection compatible
with the regulator supplied with the barbecue
and have a minimum capacity of 4kg / 9lbs, with a
maximum dimensions of 32cmx58cm.
See assembly instructions for cylinder position.
Do not store a spare LP gas cylinder under or near this
appliance.
Never fill the cylinder beyond 80% full.
Failure to follow these instructions exactly may result
in fire causing serious injury or death.
Place dust cap on cylinder valve outlet whenever the
cylinder is not in use. Only install the type of dust cap
on the cylinder valve outlet that is provided with the
cylinder valve. Other types of caps or plugs may result
in leakage of propane.
Connecting to the Cylinder
• Confirm all barbecue control knobs are in the 'OFF'
position.
OFF HI
OFF
• Connect the regulator to the gas cylinder according
to the instructions below and theinstructions from
the gas cylinder supplier.
Read carefully before use
BE
1
6
2
LO
5
7
4
3