Installation Of Monobloc Unit - Gree GRS-CQ4.0Pd/NhG3-E Owner's Manual

MONOBLOC TYPE

6.2 Installation of monobloc unit

6.2.1 Selection of installation location of monobloc unit
(1) Monobloc unit must be installed on a firm and solid support.
(2) Avoid placing the monobloc unit under window or between two constructions, hence to prevent normal
operating noise from entering the room.
(3) Air flow at inlet and outlet shall not be blocked.
(4) Install at a well-ventilated place, so that the machine can absorb and discharge sufficient air.
(5) Do not install at a place where flammable or explosive goods exist or a place subject to severe dust, salty
fog and polluted air.
6.2.2 Outline dimension of monobloc unit
(1) For models below
GRS-CQ4.0Pd/NhG3-E
415
(2) For models below
GRS-CQ8.0Pd/NhG3-E,
GRS-CQ16Pd/NhG3-E
GRS-CQ14Pd/NhG3-M
GRS-CQ12Pd/NhG4-E
GRS-CQ10Pd/NhG4-M
GRS-CQ6.0Pd/NhG3-E
1150
GRS-CQ10Pd/NhG3-E
GRS-CQ8.0Pd/NhG3-M
GRS-CQ16Pd/NhG3-M
GRS-CQ14Pd/NhG4-E
GRS-CQ12Pd/NhG4-M
17
GRS-CQ4.0Pd/NhG4-E
365
1063
GRS-CQ12Pd/NhG3-E
GRS-CQ10Pd/NhG3-M
GRS-CQ8.0Pd/NhG4-E
GRS-CQ16Pd/NhG4-E
GRS-CQ14Pd/NhG4-M
Air-to-water Heat Pump
GRS-CQ6.0Pd/NhG4-E
302
GRS-CQ14Pd/NhG3-E
GRS-CQ12Pd/NhG3-M
GRS-CQ10Pd/NhG4-E
GRS-CQ8.0Pd/NhG4-M
GRS-CQ16Pd/NhG4-M