Installation Instructions; Installation Of Indoor Unit - Gree GMV-ND280PH/A-T Owner's Manual

If actual installation condition varies, please lower the capacity appropriately according to the
specifications of power cord and air switch provided by manufacturer.
(2) Install cut-off device near the unit. The minimum distance between each stage of cut-off
device should be 3mm(The same for both indoor unit and outdoor unit).

4 Installation Instructions

4.1 Installation of Indoor Unit

4.1.1 Outline Dimension and Installation Spots
Equip with a inspection hatch after lifting the unit. For the convenience of maintenance, the
service port should be on one side of the electric box and below unit's lower level.
(1) Below are the outline dimension applicable to indoor units
Below are dimensions of A, B, C, etc. for different models:
Model
GMV-ND224PH/A-T
GMV-ND280PH/A-T
(2) Drill bolt holes and install bolts
1) Stick the reference cardboard on the installation position; drill 4 holes according to the hole
site on the cardboard as shown in fig 4.1.2; diameter of drilling hole is according to the
diameter of expansion bolt and the depth is 60-70mm, as shown in fig 4.1.3.
Multi Variable Air Conditioners Duct Type Indoor Unit
C
Air Reture
D
A
A
1353 632
1563 706
Fig 4.1.1
B C
992
992
7
E
B
F
D E
1150 192
1350 192
Unit: mm
F
327
402