Table of Contents
Advertisement
Table 8. Pressure Ranges and Body Pressure-Temperature Ratings With PED Certification
OUTLET RANGE
TYPE
psig
LS220 and
4.35 to 10
0.3 to 0.69
LS224
LS220 and
10 to 21.7
0.69 to 1.5
LS224
LS250 and
20 to 60
1.37 to 4.13
LS254
Downstream equipment, protected by possible built-in
safety shut-off device (in its Class A and integral
strength configuration) of this product, shall have
technical features such as to be category per table
below according to Pressure Equipment Directive
PED 2014/68/EU.
The regulator and built-in pressure accessories
(e.g. slam-shut controller Type VSX8) installed in
all the available sizes of LS200 Series Regulators,
conform to Pressure Equipment Directive PED
2014/68/EU Article 4 Section 3 and were designed and
manufactured in accordance with Sound Engineering
Practice (SEP).
Per Article 4 Section 3, these "SEP" products must not
bear the CE marking.
BODY
END
MATERIAL
CONNECTION
bar
PN 16
Ductile iron
CL150 RF
PN 16
Steel
CL150 RF
NPT
PN 16
Ductile iron
CL150 RF
PN 16
Steel
CL150 RF
NPT
PN 16
Ductile iron
CL150 RF
PN 16
Steel
CL150 RF
NPT
TEMPERATURE RANGE
OPERATING INLET
˚F
˚C
psig
-4 to 100
-20 to 38
-4 to 140
-20 to 60
-4 to 100
-20 to 38
-4 to 140
-20 to 60
-4 to 100
-20 to 38
125
-4 to 140
-20 to 60
-4 to 100
-20 to 38
-4 to 140
-20 to 60
-4 to 100
-20 to 38
-4 to 140
-20 to 60
-4 to 100
-20 to 38
232
-4 to 140
-20 to 60
-4 to 100
-20 to 38
249
-4 to 140
-20 to 60
242
-4 to 100
-20 to 38
232
-4 to 140
-20 to 60
-4 to 100
-20 to 38
284
-4 to 140
-20 to 60
271
-4 to 100
-20 to 38
284
-4 to 140
-20 to 60
271
-4 to 100
-20 to 38
232
-4 to 140
-20 to 60
-4 to 100
-20 to 38
249
-4 to 140
-20 to 60
242
-4 to 100
-20 to 38
232
-4 to 140
-20 to 60
-4 to 100
-20 to 38
284
-4 to 140
-20 to 60
271
-4 to 100
-20 to 38
284
-4 to 140
-20 to 60
271
Product Description
The LS200 Series Direct-Operated Gas Regulators,
shown in Figure 1 are primarily designed for
industrial and commercial applications supplying
gas to furnaces, burners and other appliances.
The LS200 Series Balancing System enables the
regulator to provide accurate control gas pressure
for maximum combustion efficiency despite varying
inlet pressure conditions. The single port construction
provides bubble-tight shutoff.
This product has been designed to be used with fuel
gases of 1st and 2nd family according to EN 437 and
with other nonaggressive and nonfuel gases. For any
other gases, other than natural gas, please contact
your local sales agent.
LS200 Series
MAXIMUM
MAXIMUM BODY
PRESSURE RATING
bar
psig
232
249
242
8.6
232
284
271
284
271
16
232
17.2
249
16.7
242
16
232
19.6
284
18.7
271
19.6
284
18.7
271
16
232
17.2
249
16.7
242
16
232
19.6
284
18.7
271
19.6
284
18.7
271
bar
16
17.2
16.7
16
19.6
18.7
19.6
18.7
16
17.2
16.7
16
19.6
18.7
19.6
18.7
16
17.2
16.7
16
19.6
18.7
19.6
18.7
5
Advertisement
Table of Contents
