Figure 030-69: Terminal Block Retaining Bracket; Figure 030-70: Holding Plate - Miele KF 18 Vi Series Technical Information

KF 18xx/19xx
Technical Information
4. Remove the three screws securing the bracket. See Figure 030-69, Item 1.
5. Take out the bracket. See Figure 030-69, Item 2.

Figure 030-69: Terminal Block Retaining Bracket

6. Remove the screw securing the holding plate; see Figure 030-70, Item 1.
7. Press the holding plate to the side. See Figure 030-70, Item A.

Figure 030-70: Holding Plate

8. Remove the screw to access the VCC control electrical connections; see
Figure 030-71, Item 1.
67