Attaching The Lower Bracket - Miele KF 1803 Vi Operating And Installation Instructions

Installing the appliance
Note the size of the upper custom door
front:
^ Measure the distance Y between the
adjusting rail from the lower door and
the upper door.
^ Be sure to leave a distance of 1/8"
(3 mm) from the upper cabinetry
door.

Attaching the lower bracket

(Only for appliances using the "Front
panel gap kit".)
76
The fixing brackets are used to secure
the custom door front to the bottom of
the appliance door.
^ Open the appliance door all the way.
^ Slightly loosen the screw (1.).
^ Position the fixing bracket on the
appliance door (2.) and pre-drill a
hole in the custom door front.
^ Screw the fixing bracket securely to
the custom door front (3.).
^ Tighten the screw (4.).
^ Put the cover on the bracket (5.).
The number of lower brackets will
depend on the width and the design of
the custom door.