Feider Machines FBVES2800-UK User Manual page 8

Any damaged or defective components should be
repaired immediately by a qualified technician. Never
attempt to use an incomplete, not fully assembled or
modified machine.
- Under no circumstances or if safety equipment such as
collection box is not installed, before using, always
visually inspect to see, that the shredding means,
shredding means bolts and other fasteners are secure,
the housing is undamaged and that guards and screens
are in place. Replace worn or damaged components in
sets to preserve balance. Replace damaged or
unreadable labels.
- Only use a weather proof extension cable fitted with
coupler to IEC 60320-2-3.
Only extension cords that are rated for outdoor use
should be used outdoors.
Any extension cord used should have a minimum cross
2
section of not light than H07RN-F 2x1.5mm .
1.2.2- During use
- Before starting the machine, make certain that the
feeding chamber is empty. Do not allow hands or any
other part of the body or clothing inside the feeding
chamber, discharge chute, or near any moving part.
- Always direct the cable to the rear away from the
appliance. Make sure the power cord is kept behind and
away from the device while you work.
- If the power cord or extension cord becomes damaged
during use, disconnect the supply cord from the mains
immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY CORD FROM ITS
8